Birty Dastards Jeep Club
Tech Forum => Workshop => Topic started by: scrw on October 28, 2008, 07:44:03 PM
-
Just spent a few hours working out the config of the seat runners to get some WJ leather seats into my Cherokee. Seems a straight forward swap, just need to drill a couple of holes and modify the seat runner to move the adjuster back. Installing them tomorrow so will do some photos.
-
Is this with manually adjusting seats or electric?
-
Electric, drivers seat in and working, passenger to do this afternoon.
Need to find some switches for the heated seats before I wire them in, did Mk2 XJ's ever have a heated seat option?
-
I believe the Orvis version did.
I'd be interested to see some photos
-
pictures here
http://www.offroading.net/forum/viewtop ... 182#p22182 (http://www.offroading.net/forum/viewtopic.php?f=43&t=3930&p=22182#p22182)
Just looked at a makes XJ Orvis, no heated seats
-
Updated the above, now have 2 WJ seats fitted
-
where r photos
-
use the url above, should see the photos on the link
-
They are so much better than the old seats on a cold morning even without the heaters wired in. XJ leather seats seem to get very cold, new ones don't. Best mod apart from the LPG without a doubt, dead comfy.
Doing the rears this week
-
they look well smart
-
Do they sit higher or lower than the standard xj seat?
-
unsure, if you use the standard XJ rails on the drivers side it will be the same height I think, but I modded the WJ rails and got an inch extra height I think.
-
All that extra heat will get you piles methinks...