Birty Dastards Jeep Club

Tech Forum => Workshop => Topic started by: Bulldog67 on March 27, 2009, 04:49:22 PM

Title: Bushwackers (cut out)
Post by: Bulldog67 on March 27, 2009, 04:49:22 PM
Right, ordered myself some shitwackers, the box arrived and it says CJ cut out fender flares, the code on the flares matches the box, so in theory they are correct, but when they are lined up they sit behind the arch itself on one side, sloping off to about 1-1.5" behind the wheel arch at the bottom (side near the rear), I know pic would be more sense but im not there at the mo. So:

Is this normal? Am i gonna have to cut the tub? (well i wont be cuttin it but u know what i mean) Have they sent the wrong ones?

Trawled the net but cant find a clear pic. I kinda assumed from the description it was gonna be a straight like 4 like fit, but as most of u know, my talent for tech like numptiness is probably unsurpassed, so im also beginnin to assume i just guessed wrong.

Cheers
Title: Re: Bushwackers (cut out)
Post by: Mike Pavelin on March 27, 2009, 05:03:56 PM
Could the name 'cut out flares' be a clue?
Title: Re: Bushwackers (cut out)
Post by: Bulldog67 on March 27, 2009, 05:07:59 PM
:lol: Is that the answer Dr Mike or a stab in the dark? No mention of cuttin in their blurb, and so much has dumbass names i just assumed (there i go again) that it was just another one!
Title: Re: Bushwackers (cut out)
Post by: Bulldog67 on March 27, 2009, 05:16:05 PM
Ahhh, as is usual, once you stop lookin u find it the answer:

TIP: When installing flares - If original quarter panel is not cut, then you may want to black out (flat black) panel under flare to conceal original panel.

Shame bushwacker themselves dont bother tellin you that, had to go to a Ford  :evil:

Cheers Mike
Title: Re: Bushwackers (cut out)
Post by: Tragic on March 27, 2009, 09:23:32 PM
Cut! Cut! Cut! Cut! Cut! Cut!

Hacksaw, plasma, grinder, who cares!


Cut 'er up! You know you want to  :mrgreen:  =D>
Title: Re: Bushwackers (cut out)
Post by: greggmo on March 27, 2009, 10:11:54 PM
jigsaw works prety good. i was gonna say read the instructions in the box :lol:
Title: Re: Bushwackers (cut out)
Post by: Bulldog67 on March 27, 2009, 10:34:18 PM
:smt103 and im sober so im gonna remember typin this in the mornin :mrgreen:
Title: Re: Bushwackers (cut out)
Post by: momos on March 27, 2009, 10:40:51 PM
hope you`ve got some chalk?  :lol:
Title: Re: Bushwackers (cut out)
Post by: Jeepthang on March 28, 2009, 12:08:38 AM
What the doc says is right.

All Bushwacker Cut-out Flares need fender trimming for them to fit correctly. Regardless of what Jeep they are for. I've got B/W Cut-Outs on my XJ and there was a hell of a lot of trimming to be done. Otherwise it's all a bit pointless as the original fender will be hanging down inside the B/W  :shock:

Get that cutter out and have some fun!! :mrgreen:
Title: Re: Bushwackers (cut out)
Post by: Bulldog67 on March 28, 2009, 12:09:18 AM
that would involve plannin momos, not my strong point #-o