Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3] 4 5 ... 10
 21 
 on: August 14, 2023, 11:30:02 PM 
Started by Nosebolt - Last post by vince
I ran 265/75R16 on a 2" SkyJacker lift kit with stock wheels and flares. Tyre tread was covered and the Jeep worked well off-road.
The tyres were fitted a few days before the lift and from what I remember it was driveable on the street. Didn't try it off-road with the 265 tyres without the lift.

The 235/75R16 is fine with no lift on stock wheels.

 22 
 on: August 06, 2023, 08:00:03 AM 
Started by PaulC - Last post by frosty 1
i would be looking for a second hand box for it.

 23 
 on: July 28, 2023, 06:24:57 PM 
Started by PaulC - Last post by PaulC
The transmission died on me a few months ago. Renewed the fluid and filters and all was well.

Soon afterward though it would drop out of overdrive while at speed. Only stopping, shutting down, waiting and re-starting would fix it but for a mile or so before it happened again.

Fault codes include transmission overheat but the temperature is 'only' 112C which doesn't seem high to me?

It sometimes doesn't change up smoothly but jerks. When decelerating it sometimes 'hangs' in O/D or 3rd gear then, when I apply throttle it changes down with a jerk. It's not great.

I'm guessing but 'IF' there's sludge or a blockage then getting it flushed might be a good idea. My friendly mechanic doesn't have the equipment for that so can only offer a fluid and filter change. I tried one local specialist who quoted me £6000 (yeah, right).

Any ideas or recommendations in Herts/Essex would be appreciated. For a company that knows what they're doing I'd even travel further.

 24 
 on: July 14, 2023, 06:57:36 AM 
Started by Nosebolt - Last post by Nosebolt
one for the hive mind, I am looking at new tires, and TBH this is 70% looks 30% performance.

My problem is a lot of conflicting info, so a few questions

how big can I go without a lift?
are Puck lifts OK/safe?
how much effect does wheel offset have?
if I go for 285/75r16 (these are just under 33") what are the min mods needed?

 25 
 on: June 25, 2023, 09:58:30 PM 
Started by Clarky735 - Last post by Clarky735
Not getting an error code ,just saying I don't have permission. Sorry can't remember my previous username.

 26 
 on: June 21, 2023, 03:02:47 PM 
Started by Clarky735 - Last post by ivanidea
Hi Clarky,

Are you getting an error like below?


An Error Has Occurred!
Call to undefined function mysql_result()


If so, it seems to be affecting everybody.

Also, if you remember your previous username let me know, and I will see if I can assign your previous posts to your current account.


 27 
 on: June 21, 2023, 01:29:39 PM 
Started by Clarky735 - Last post by Clarky735
Recently joined(again) after a few years away from jeeps
Only problem is I can't access anything in the
Garage section,says I don't have the correct permissions
Can admin tell me what I'm doing wrong
Please. Cheers clarky735

 28 
 on: June 07, 2023, 06:16:48 PM 
Started by bisleywrangler - Last post by vince
Thanks. Sorry for the delay, I have updated my calendar. What's the cutoff date for Summer Walters? I'm on a big green laing trip during the week before. I would really like to get one day at Walters on Saturday before I have to head home.

 29 
 on: June 05, 2023, 12:04:15 PM 
Started by ZJ_CREEP - Last post by ZJ_CREEP
I'm still looking for any help or recommendations regarding the fitting of my shafts and diff

 30 
 on: May 02, 2023, 11:08:12 PM 
Started by ZJ_CREEP - Last post by donk498
Send Ian (bisleywrangler) a message. He's Gloucester way and can do diffs.

Pages: 1 2 [3] 4 5 ... 10
Powered by EzPortal