Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: TJ Clunking when turning.  (Read 3964 times)

0 Members and 2 Guests are viewing this topic.

phn

  • Guest
TJ Clunking when turning.
« on: May 21, 2009, 11:20:26 AM »

Strange problem on my 97 wrangler TJ.  

When turning sharp corners at low speed (especially when setting off from stopped) there is a rattling / clunking sound that comes from the back of the jeep (sounds like tin cans being dragged along the ground!).  I'm not sure the exact location of the noise but I was wondering if it could be something wrong with the rear diff?  Or something else???   :-)

Philip.
Logged

Mike Pavelin

  • Guest
Re: TJ Clunking when turning.
« Reply #1 on: May 21, 2009, 05:52:03 PM »

It's the rear diff. The first thing to try is drain the oil, refill with 75W90 GL5 gear oil with a bottle of Mopar friction modifier added.
Logged

phn

  • Guest
Re: TJ Clunking when turning.
« Reply #2 on: May 21, 2009, 07:55:14 PM »

Thanks for the advice  :-D  - I'll get it sorted ASAP!

Philip.
Logged

timtap

  • Guest
Re: TJ Clunking when turning.
« Reply #3 on: June 09, 2009, 05:24:47 PM »

I have the same problem in my 98 Cherokee Laredo.   If I change the oil and add the additive as prescribed by Mike will it release the seizure or is it likely that a strip down will be needed as well . My other question is  ; Is there any way to remove the LSD function all together as I do not really need it and the only use I get out of the car is Towing Boats around the country so she really does not even get dirty (shame).
Logged

isle of man

  • بعض العضو التناسلي النسوي...
  • Club Member
  • Forum Member
  • *
  • Guru: 6
  • Offline Offline
  • Posts: 11537
  • Vehicle: G-Class AKA “The G spot”
  • Take the road less travelled...
    • http://www.4x4.im
Re: TJ Clunking when turning.
« Reply #4 on: June 09, 2009, 08:36:49 PM »

Quote from: "timtap"
I have the same problem in my 98 Cherokee Laredo.   If I change the oil and add the additive as prescribed by Mike will it release the seizure or is it likely that a strip down will be needed as well . My other question is  ; Is there any way to remove the LSD function all together as I do not really need it and the only use I get out of the car is Towing Boats around the country so she really does not even get dirty (shame).

έκανε κάτι λείπει
Logged
"Not all those who wander are lost"

tim_aka_tim

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
Re: TJ Clunking when turning.
« Reply #5 on: June 09, 2009, 08:52:39 PM »

Quote from: "isle of man"
έκανε κάτι λείπει
As the actress said to the bishop.
Logged

Dutch

  • The Curator
  • Club Member
  • Forum Member
  • *
  • Guru: 12
  • Offline Offline
  • Posts: 5798
Re: TJ Clunking when turning.
« Reply #6 on: June 09, 2009, 08:57:01 PM »

Quote from: "isle of man"

έκανε κάτι λείπει

A riddle ?? :-o

Whats exactly missing then ?
Logged

Jeepless :-( 2006 Chrysler Crossfire Roadster 3.2 V6 - 1993 Yamaha FJ1200

Bishops Finger

  • Guest
Re: TJ Clunking when turning.
« Reply #7 on: June 09, 2009, 09:57:49 PM »

Eh .....???
Logged

timtap

  • Guest
Re: TJ Clunking when turning.
« Reply #8 on: June 10, 2009, 03:03:15 PM »

έκανε κάτι λείπει

 Ok ,so the rough translation is  'something is missing'

  would you care to elaborate further ?
Logged

timtap

  • Guest
Re: TJ Clunking when turning.
« Reply #9 on: July 24, 2009, 04:03:49 PM »

  Seriously Need Help NOW !!!

     Because My Cherokee really is'nt used very much I have a serious issue with the rear dif . Despite having changed the oil and added the Mopar the rear drive is still locked up ..
   I am serious about the question as to whether it is possible to have a conventional rear diff as opposed to LSD .  I have tried doing the figure of eight stuff and trying to unseize it as per other posts on this forum without any luck.
              So Is it Possible ?????
   Or is there someone down here in Devon that can repair it for me ??   
Logged

tim_aka_tim

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
Re: TJ Clunking when turning.
« Reply #10 on: July 24, 2009, 05:20:15 PM »

You can happily replace the LSD with an open diff, though you will lose off-road ability.
Logged

timtap

  • Guest
Re: TJ Clunking when turning.
« Reply #11 on: July 28, 2009, 02:18:43 AM »

  The way things are I think I'd Gladly change it to an open diff.  so the next question is would I be able to get hold of one in the UK and if so is there a Part Number for such a thing ?

             Tim
Logged

isle of man

  • بعض العضو التناسلي النسوي...
  • Club Member
  • Forum Member
  • *
  • Guru: 6
  • Offline Offline
  • Posts: 11537
  • Vehicle: G-Class AKA “The G spot”
  • Take the road less travelled...
    • http://www.4x4.im
Re: TJ Clunking when turning.
« Reply #12 on: July 28, 2009, 11:43:46 AM »

Buy a used rear axle it will be cheaper - I believe KD or the Smiths are dismantling a couple.
Logged
"Not all those who wander are lost"

Mike Pavelin

  • Guest
Re: TJ Clunking when turning.
« Reply #13 on: July 28, 2009, 10:15:59 PM »

  The way things are I think I'd Gladly change it to an open diff.  so the next question is would I be able to get hold of one in the UK and if so is there a Part Number for such a thing ?

             Tim

All UK spec TJs had Dana 44s with Trac-Loc limited slips fitted. Your easiest soloution would be to get a complete used axle from another TJ, and it has to be from a TJ, and from one with the same engine size and transmission, but there's no gaurantee it won't be as shagged as yours. You couldfit either a new open diff or something like a Detroit True-trac, but any replacement diff has to be set up properly, you can't just bolt it in and go.
Logged

Bishops Finger

  • Guest
Re: TJ Clunking when turning.
« Reply #14 on: July 28, 2009, 10:37:16 PM »

Buy a used rear axle it will be cheaper - I believe KD or the Smiths are dismantling a couple.

Wouldn't buy a packet of mints from KD.....
Logged

sprintagogo

  • Guest
Re: TJ Clunking when turning.
« Reply #15 on: July 28, 2009, 11:08:28 PM »

I'm sure an ebay seller was advertising replacement clutch packs for the Dana 44 LSD recently at silly prices (~£60?). It might have been Mansfield 4x4 ltd (landrover-jeep-parts) so it could be worth giving them a call to see if they still have any. This would sort out your noisy LSD unit once fitted and I beleive it isn't too hard to do?
Logged

isle of man

  • بعض العضو التناسلي النسوي...
  • Club Member
  • Forum Member
  • *
  • Guru: 6
  • Offline Offline
  • Posts: 11537
  • Vehicle: G-Class AKA “The G spot”
  • Take the road less travelled...
    • http://www.4x4.im
Re: TJ Clunking when turning.
« Reply #16 on: July 29, 2009, 05:07:08 PM »

I have in stock a TJ Dana44 rear axle done 1000ish miles from my wrangler before I swoped out to the Dana60's - bid me I could be tempted to sell it.
Logged
"Not all those who wander are lost"

timtap

  • Guest
Re: TJ Clunking when turning.
« Reply #17 on: July 30, 2009, 11:59:35 AM »

 Thanks for that chaps !!!
   I may throw in a new clutch pack if the rain ever stops down here in Devon,
      Is there a link for fitting instructions on this site anywhere ?

    I spent some time phoning around and No-one (garage) seems to want to touch the job !!!!!  Is it really that bad ?
Logged
Pages: [1]   Go Up
 

Powered by EzPortal