Topic: radio code (Read 4352 times)

MOCAJ · « **on:** August 07, 2009, 07:35:44 PM »

had to disconect battery to clear a fault code

have the code but cant remember how to input it

this is the radio

[attachment=1]

had the same radio in liberty but cant remember what to enter after the code

isle of man · « **Reply #1 on:** August 07, 2009, 07:51:23 PM »

Punch in the code then press 5 to accept

tim_aka_tim · « **Reply #2 on:** August 07, 2009, 10:33:13 PM »

If your code was 8765, then press button '1' 8 times to the first character is 8, then press '2' 7 times etc until the screen says your number, then press '5'.

MOCAJ · « **Reply #3 on:** August 08, 2009, 10:52:48 PM »

still no joy, dont think you enter it as tim said

just straight entry but i seem to remember you had to press something after, prioity or set or

?

has anyone got the audio manual for this radio. I know it was fitted in the Liberty too

Bubba · « **Reply #4 on:** August 09, 2009, 10:59:18 AM »

put the code in carefully then swear at it ..LOTS

momos · « **Reply #5 on:** August 09, 2009, 02:41:28 PM »

good god, brace yourself...

'To enter the code, turn key to ON or ACC position and press the ON/VOL control.
The word CODE will appear on the display. Enter your four digit code by pressing the appropriate preset
buttons in sequence.(1'2'3'4'5) Your radio is now ready for basic operations.'

scalpel hehe

However... if invalid code is entered into radio it will give 2 more attempts. The 3rd fluffed entry will set the lockup mode.
In this mode it must be in a state where battery is applied for 30mins, (leave running?)
During this time, if the radio is on, it will say WAIT. After 30mins it will say CODE...
note; key must be at ON or ACC.

I copied it so it can't be wrong
good luck

Bishops Finger · « **Reply #6 on:** August 09, 2009, 03:00:01 PM »

Blinkin heck...good one Momos...

momos · « **Reply #7 on:** August 09, 2009, 03:04:47 PM »

i know, i need a lie down

MOCAJ · « **Reply #8 on:** August 09, 2009, 07:29:49 PM »

still no good, i might have been given the wrong code from the seller, first time i have needed it to be fair

momos, did you have audio manual when you had your truck ?

momos · « **Reply #9 on:** August 09, 2009, 07:51:24 PM »

pisser, if you fancy I can send it you, return cheapfest?
or just have the 1/2 hour WAIT thingum with key on all the way round....errrr
the book has all systems, maybe i gots the wrong one
just let me know

Bishops Finger · « **Reply #10 on:** August 09, 2009, 11:48:51 PM »

MOCAJ..if the MOMOS advice don't work then possibly other options the lass ssenses..

momos · « **Reply #11 on:** August 10, 2009, 09:11:32 AM »

i think u might need to just take it to a decoder place, sorry Mocaj
it was only a tenner last time
faff tho

Mike Pavelin · « **Reply #12 on:** August 10, 2009, 08:48:22 PM »

Phone a Jeep dealer and give them the serial number off the set and they will get the code from the manufacturer.

isle of man · « **Reply #13 on:** August 10, 2009, 09:07:03 PM »

Ask about the cost if you do ring the main dealer though..

Nosebolt · « **Reply #14 on:** August 10, 2009, 09:42:07 PM »

also be aware that if the radio has had its code read before, some radios decoded with some equipment will write a different code so the dealer suplied code may not work. could also explain why the code you have don't work

Author Topic: radio code (Read 4352 times)

MOCAJ

radio code

isle of man

Re: radio code

tim_aka_tim

Re: radio code

MOCAJ

Re: radio code

Bubba

Re: radio code

momos

Re: radio code

Bishops Finger

Re: radio code

momos

Re: radio code

MOCAJ

Re: radio code

momos

Re: radio code

Bishops Finger

Re: radio code

momos

Re: radio code

Mike Pavelin

Re: radio code

isle of man

Re: radio code

Nosebolt

Re: radio code