Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Freeze Plug - Core Plug 2.5tdi XJ (98)  (Read 3317 times)

0 Members and 1 Guest are viewing this topic.

snozzer

  • Guest
Freeze Plug - Core Plug 2.5tdi XJ (98)
« on: March 22, 2010, 07:14:53 PM »
Well, I was about to take the head off to change the gasket, but no find that the coolant leak is from what looks like a core plug on the No1 Cylinder right at the front (on the RHS) that has let go.

Bloody manual doesnt show anything, is it an easy fix?
Logged

Panic mechanic!

  • Guest
Re: Freeze Plug - Core Plug 2.5tdi XJ (98)
« Reply #1 on: March 22, 2010, 07:16:47 PM »
yup.knock it out, clean up the hole and put a knew one in basically.
Logged

snozzer

  • Guest
Re: Freeze Plug - Core Plug 2.5tdi XJ (98)
« Reply #2 on: March 22, 2010, 07:20:26 PM »
Wow super fast reply, do I need to take the cylinder head off and if so do I need then to replace the head gasket
Logged

Panic mechanic!

  • Guest
Re: Freeze Plug - Core Plug 2.5tdi XJ (98)
« Reply #3 on: March 22, 2010, 07:30:16 PM »
nope. as long as you can get to access to it to  get it out and get one back in and a hammer and centre punch to it, you should be ok. ( got to admit tho never done one on a diesel)
Logged

The Smiths

  • Guru
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 1084
Re: Freeze Plug - Core Plug 2.5tdi XJ (98)
« Reply #4 on: March 23, 2010, 12:31:16 AM »
If you can get to it you are VERY lucky - and just change it.

If you needed to remove it to change it then you must do the head gasket - and you should change all the plugs (others are likely to be in similar condition, but shove antifreeze in and hope they don't go)
Logged
If you always do what you have always done You will always get what you have always got
Please give to our Mac4x4 fund: http://www.justgiving.com/The-Smiths-2015
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal