Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Bubba]

i realy need a new one any ideas where from if at all  jeep on a k plate

[gazjeep]

Ebay dude 

[Bubba]

looked but they are not the same i think mine might be factory /dealer clifford thing i realy need in put from mr pavlin as i think he will know

[gazjeep]

Which shape is yours kev ?
 
IIRC there were 2 types, the later ones were rectangular but the early ones more coffin shaped ?

Gotta be some pics on here somewhere 

[Nosebolt]

this any use?

[attachment=1]

[Bubba]

its nearly identical to the square one  it says made in usa  and says codealarm on the front

[Nosebolt]

here's the numbers if it helps, yours if you want it, also have the clifford service software and cable if you need to reprogram the alarm

[attachment=1]

[Bubba]

to faded to tell and the buttons on mine are just 2 square ones

[Bubba]

my xj has the funny dash mounted vallet mode thing that has two led lights a green one vallet mode and a red one panic mode [starts talkin tech jibberish]
next to the led lamps is a button to select that mode from inside it says Chrysler on it

[gazjeep]

http://cgi.ebay.co.uk/CHRYSLER-JEEP-2-BUTTON-REMOTE-FOB-CHEROKEE-VOYAGER-/120699966251?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1c1a47532b

Similar but not quite this then ?

[Nosebolt]

thats a clifford master fob, extra buttons are for remote start boot open etc and dont need to be used so will work if yours is a clifford, or is it like this one

[attachment=1]

[Bubba]

right shape but my buttons are two thirds of the way up and the fob does not have the penta star

[Nosebolt]

would probably be easier if you posted a pic rather than us keep guessing

[Bubba]

i agree but this is me we talkin about and thats pc trikery

[gazjeep]

Just get the kids to do it FFS 

[donk498]

[attachment=1]

Guess you mean one of these? If so good luck, i spent a long time looking for one before giving up and getting an infra red type of ebay and leaving the alarm in valet mode. There should also be a small black push button somewhere under the dash by the fuse box, which if pressed with ignition on turns the immobiliser off.
You could have this remote of me but i suspect you'd be no better off.

Dave.

[Bubba]

yay thats the one and yes i do have a button under the dash but been afraid to mess in case i triggered the imoby and could not then disarm it with the fooked fob

[Mike Pavelin]

It's an aftermarket system, so it can be removed. Find the control box under the dash (all the wires to it will be black) and follow the wires to see where they join into the vehicle harness. Where you find a single original wire that's been cut and the two ends connected to seperate wires to the alarm, disconnect them from the alarm and join them back together. There will only be 2 or 3 wires that actually stop the Jeep running.

[Dave69]

 

only two yellow wires were cut and wired into the alarm i had fitted to mine, fit a secret switch into the fuel pump line feed for added security if needed

[Jonny Jeep]

I don't know how easy it is to program fobs to codealarm systems but there are fobs on ebay. Most are in the US but there's one in bedford for 99p.

http://shop.ebay.co.uk/?_from=R40&_trksid=m570&_nkw=codealarm+fob

[Bubba]

alarm in valet mode. There should also be a small black push button somewhere under the dash by the fuse box, which if pressed with ignition on turns the immobiliser off.


Dave.

the button dont turn the imoby off how do i know just tried it  the imoby has kicked in my fob dont work i have a replacement fob but no idea how to program it arse

and ally is in hopital and i need to pick her up in a bit                          help

[Bubba]

sorted armed with bollocks and side cutters i have just removed the system jeep now runs

[chrisjones]

sorted armed with bollocks and side cutters i have just removed the system jeep now runs

That's the way to do it.