Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: T90 gearbox in Mitsi J26 help please  (Read 1340 times)

0 Members and 1 Guest are viewing this topic.

Invicta

  • Guest
T90 gearbox in Mitsi J26 help please
« on: June 27, 2011, 02:21:13 PM »

I have column change 4 speed KM141 (based on the T90) in my 1975 Mitsubishi Model J26 Jeep.

It is relatively difficult to get 2nd gear to engage and so I was wondering if anyone had any suggestions?
All other gears engage and disengage well enough.

Or might someone be able to recommend a place that would take the box out, recondition it and put it back in.
Preferably somewhere around the west midlands or south west as I live in Tewkesbury.

All help will be very much appreciated,
Bern
Logged

dieselj20

  • Guest
Re: T90 gearbox in Mitsi J26 help please
« Reply #1 on: June 27, 2011, 07:39:41 PM »

drop the box out and change second gear bulk ring t90s are three speed post a picture
Logged

Invicta

  • Guest
Re: T90 gearbox in Mitsi J26 help please
« Reply #2 on: June 28, 2011, 03:33:29 PM »

J20,

I'll take a couple of pictures of the gearbox as best I can but unfortunately I don't have the tools or experience to remove the box or delve into the innards.
So if you take alook at the photos and have any more suggestions I'd appreciate hearing them.

I'm also going to make some nylon bushes (from moldable Polymorph) for the column change to take up any slack in that part of the mechanicals.

Thanks for such a quick reply,
Logged

Invicta

  • Guest
Re: T90 gearbox in Mitsi J26 help please
« Reply #3 on: June 28, 2011, 04:13:29 PM »

Here's some photos...
It will include a general picture of the column change, Hi/Lo and Overdrive gear levers, the linkage and the gear sequence (from the top of the gear lever).
Not sure how much this will help but it's the best I can do at the moment. :)
Logged

Invicta

  • Guest
Re: T90 gearbox in Mitsi J26 help please
« Reply #4 on: June 28, 2011, 05:02:12 PM »

What a wonderful tool the web is.
here's some JPG pictures of a Japanes workshop manual all the way from Kyoto care off a  YouTube guy called Bigsstone.
Logged

dieselj20

  • Guest
Re: T90 gearbox in Mitsi J26 help please
« Reply #5 on: June 28, 2011, 05:37:26 PM »

looks like an early shogun box are the parts available from Mitsubishi
Logged

Invicta

  • Guest
Re: T90 gearbox in Mitsi J26 help please
« Reply #6 on: June 29, 2011, 05:38:33 PM »

J20,

As the Jeeps were never supposed to leave Japan, under the terms of the licesne agreement with Jeep, Mitsubishi UK deny all knowledge. The last time I asked about a part for a carburettor, on the basis that they must have access to parts as they rebuilt a J26 in Cirencester and put it on their stand at Badminton, they quoted me a lead time of over 3 months. I got them within 2 weeks from a chap in Kyoto.

If the box looks like it comes from an early Pajero or Shogun then perhaps I'll try the owners club as if the parts I need to get the gearbox working properly aren't available in the UK and are small/light enough then I'll try Kyoto again.

Thanks for the suggestions,
Bern
Logged
Pages: [1]   Go Up
 

Powered by EzPortal