Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: VM ENGINE PROBLEM.... advice needed...?  (Read 1497 times)

0 Members and 1 Guest are viewing this topic.

wildrover

  • Guest
VM ENGINE PROBLEM.... advice needed...?
« on: January 03, 2012, 12:55:53 PM »
Last night i was tootling along in my 97 Diesal Cherokee , when it lost power , made some nasty noises , and would not rev easily over 2,000 revs...

Today i had a quick look under the bonnet and saw that one of the rocker cover bolts was loose , something thats happened before when a pushrod has popped out of place due to a duff hydraulic adjuster....

What i would like advice on is....

Should i give the car a good thrashing with the stout towrope i keep in the car , or would a tree branch be more suitable....?

I also have a selection of yard brooms , metal poles , and large rocks if the experts think thats whats needed....
Logged

Bulldog67

  • Arthur Daley: Graduated
  • Guru
  • *
  • Guru: -936
  • Offline Offline
  • Posts: 25395
  • Vehicle: Man Sized Old Iron
  • Anti Colour Truck Mafia - I'm The Fuckin Daddy
Re: VM ENGINE PROBLEM.... advice needed...?
« Reply #1 on: January 03, 2012, 01:06:17 PM »
Do what u shud hav done in the frst place and buy some PETROL and burn it at the stake :jump_125:
Logged
Bulldog's 22+ trucks: http://www.birtydastards.com/frm/index.php?topic=20288.0 :025:                                   :headbanger: 401 Dog * 401 Molotov :headbanger:  
Civilise the mind but make savage the body  :027:           Im only responsible for my karma :059:

Tank

  • Guest
Re: VM ENGINE PROBLEM.... advice needed...?
« Reply #2 on: January 03, 2012, 04:18:45 PM »
I find a sledge hammer is quite good........
Logged

dieselj20

  • Guest
Re: VM ENGINE PROBLEM.... advice needed...?
« Reply #3 on: January 03, 2012, 05:18:44 PM »
my mates vm kept dropping a push rod so i took the rocker arm off and tig welded a 13mm peace of tube on the socket end of arm it stops the pushrod escaping
Logged

wildrover

  • Guest
Re: VM ENGINE PROBLEM.... advice needed...?
« Reply #4 on: January 03, 2012, 07:38:37 PM »
Yep..it may be time to have a few nuts welded on....

I rather like the sledgehammer idea tho...?
Logged

Dave69

  • Club Member
  • Forum Member
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
Re: VM ENGINE PROBLEM.... advice needed...?
« Reply #5 on: January 03, 2012, 07:43:37 PM »
i welded some nuts on the rockers to improve the poor seat. worked fine and no more jumping pushrods
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
Re: VM ENGINE PROBLEM.... advice needed...?
« Reply #6 on: January 03, 2012, 07:45:44 PM »
fire lighters are your freind
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

bigjeepzj

  • Club Member
  • Guru
  • *
  • Guru: 22
  • Offline Offline
  • Posts: 3438
  • lift it, brake it, Fix it brake it, fix it again
Re: VM ENGINE PROBLEM.... advice needed...?
« Reply #7 on: January 03, 2012, 08:01:39 PM »
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal