Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mr smith]

Bought a resistor because heater only worked when switch was between full and next setting below..
This hasn't resolved..
Seems that if i push the switch hard i can make it come on full power.. so I'm assuming the switch is knackered..
Two questions, how does all of the dash unscrew so i can get to switch panel and where do i get another switch from.. seems this is not a stocked part from doing a little searching.. any ideas gents? Typical as we are about to get a cold spell!!
Found this which I guess is what I need to find in the UK.. http://www.quadratec.com/products/55412_0005.htm

Thank you,
Mr smith.
Wrangler TJ 2001, 4L

[Cockney Boy]

To get access to the heater controls you'll need to pull off the trim where the screen vent is (under that are two screws) and then pull off the trim that surrounds the heater co trols and radio

[Green Jeep]

Maybe see if a breakers has a TJ in? Often see them on eBay.

Or search 4x4 breakers through google, hope this helps.

Cheers Maf

[mr smith]

Here's a vid..

Need to start ringing the breakers.. shout me if anyone has a switch floating in their spares!
Thanks for the help.

[Rocky4wd]

Here's a vid..

Need to start ringing the breakers.. shout me if anyone has a switch floating in their spares!
Thanks for the help.

Loved the accent on "knackered"  - sorry can't help though with a switch.

[mr smith]

Got it sorted, just before the cold spell thankfully! >
Thought I'd do a vid for novices like me for future use..