Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[pinzmeister]

I'm a newbie to Jeep ownership, I have a 1995 Wrangler 2.5 petrol, I need to replace the crown wheel and pinion bearings in the rear axle. I believe it is a dana 30 with the Tracklock? diff. How the hell do I get the halfshafts out??? Any advise greatly appreciated.

[Mike Pavelin]

It's a Dana 35.

You have to remove the shaft that the spider gears run on ib the diff carrier, push the halfshafts inwards, then slip the C-clips off the end of the shafts. They'll just slide out then.

[Bubba]

What he said              and welcome we are all a tad  strange but harmless

[Jeepjedi]

Do as above dude, Welcome to the club matey

[bigjeepzj]

hello
and what they said

you will need a normal 12 point 1/4"  socket like this
http://www.ebay.co.uk/itm/Britool-E113742B-Socket-Bi-Hex-12-Point-Regular-1-4-in-Drive-1-4-in-/350704041270?pt=UK_Hand_Tools_Equipment&hash=item51a796fd36

to remove the big pin

[Lornaben]

Hellau 

[pinzmeister]

Thanks for the welcome and the advice guys, pulled the axle apart today, it's easy when you know how!