Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: gear ratio's  (Read 1403 times)

0 Members and 2 Guests are viewing this topic.

georgen

  • Guest
gear ratio's
« on: June 24, 2014, 06:55:08 PM »

What gear ratio's were offered standard for my 97 tj 4.0L manual, read that 3.73 but looking at the chart on here think they might be 3.07, cant read the tags on the axles but can tell you at 65mph in fifth gear equates to 1750 rpm running 33's, if this is the case for 33" tyres is 4.11 ratio right to bring back to stock gearing and if i went to 35" tyres then would be slightly longer than stock, I dont have a problem off road but its on road that killing me as its a daily drive, I could almost get banned in 3rd with this set up. I have looked at the gear ratio chart on the home page but it doesn't go down to what I am experiencing if I am reading it right.
Logged

Mike2909

  • Guest
Re: gear ratio's
« Reply #1 on: June 24, 2014, 09:28:17 PM »

You can take the tags off and clean them up, you can usually read them then.
Another easy way ,if your TJ has the original axles just get the build sheet from Chrysler, it will tell you everything you need to know.
Logged

georgen

  • Guest
Re: gear ratio's
« Reply #2 on: June 24, 2014, 09:38:11 PM »

cheers, will try to clean up and read.
Logged

JamesH

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4998
  • Vehicle: JK
  • Year: 2010
Re: gear ratio's
« Reply #3 on: June 24, 2014, 09:56:45 PM »

TJ with 4.0 and manual box is usually 3.07
Logged
Pages: [1]   Go Up
 

Powered by EzPortal