Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Torx bits ??  (Read 4134 times)

0 Members and 1 Guest are viewing this topic.

Anonymous

  • Guest
Torx bits ??
« on: April 06, 2006, 08:41:15 PM »
OK, as we are new to TJ ownership, it has come to my, sorry, our attention that the latest edition to the driveway has a multitude of these star / torx bolts adorning it & holding various bits on that wisdom has it need removing.

So, has anyone got any idea of what size bits I need & any recomendations of what make folks have experience of / where from would be appreciated.

Ta lots GJ & MM
Logged

Anonymous

  • Guest
(No subject)
« Reply #1 on: April 06, 2006, 08:49:18 PM »
prob got some here you can have!! got a few sets kicking about!!
Logged

MK1

  • Guest
(No subject)
« Reply #2 on: April 06, 2006, 08:52:23 PM »
The last set I bought was Draper Expert for about £16.

It's not quite professional quality but for how often it gets used it's fine.

Comes with a full range of Torx, spline and Hex (allen) keys.
Logged

Dodster

  • Guest
(No subject)
« Reply #3 on: April 06, 2006, 08:57:27 PM »
I have 7 bits T20 to T55 which have covered most things so far. T55 is the bumper/Rec point size. I bought mine from Halfrauds but now i would get them from www.machinemart.co.uk or  www.screwfixdirect.com
Logged

isle of man

  • بعض العضو التناسلي النسوي...
  • Club Member
  • Forum Member
  • *
  • Guru: 6
  • Offline Offline
  • Posts: 11536
  • Vehicle: G-Class AKA “The G spot”
  • Take the road less travelled...
    • http://www.4x4.im
(No subject)
« Reply #4 on: April 06, 2006, 08:58:18 PM »
try these   http://cgi.ebay.co.uk/Am-tech-10Pc-1-2- ... dZViewItem

the delivery is £5.50gbp seems sensible to me...



peter henry
Logged
"Not all those who wander are lost"

greggmo

  • Founder
  • Forum Member
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 8230
(No subject)
« Reply #5 on: April 06, 2006, 09:27:15 PM »
when you get some torx bits get some good ones. also if you try them in what you want to undo make sure they are a perfect fit, then give em a good smack on the back with a hammer to shock em. if that torx bit dont fit well dont even try to undo em cos they are real easy to round off. recon they where made from swiss cheese not steel. :roll:
Logged

Anonymous

  • Guest
(No subject)
« Reply #6 on: April 06, 2006, 10:21:54 PM »
Cheers guys  :wink:

Nice one KD sire
Logged

greggmo

  • Founder
  • Forum Member
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 8230
(No subject)
« Reply #7 on: April 07, 2006, 05:53:26 PM »
the only trouble with the easy outs is that if you break one of those you have a total pain in the ass. :banghead:
Logged

Roland

  • Guest
(No subject)
« Reply #8 on: April 07, 2006, 06:34:45 PM »
. . . . couldn't agree more, they are a pile of :pokinit:  :smt078
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
(No subject)
« Reply #9 on: April 07, 2006, 09:45:38 PM »
more like not so easy outs they are wank they just spread the thing you are tryin to get out boloxing the whole job up
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

Anonymous

  • Guest
(No subject)
« Reply #10 on: April 22, 2006, 07:41:13 PM »
Cheers folks, I bought the set off eBay as suggested by Peter & found that the bumper recovery points are exactly as Dodster said T55.  :wink:

Now then, after weilding them succesfully today, I replaced the rear recovery point for a Steve Middleton type special & was gonna fit an extended loop on the front supplied by Dr Evil.

Trouble is the Torx bolts on the front aint long enough to even catch the thread so any suggestions for sourcing longer ones or are these little suckers only available from stealerships ?
Logged

Mort

  • Guest
(No subject)
« Reply #11 on: April 22, 2006, 10:33:50 PM »
The ones that you'll get from the stealership come in two lengths - the shorter ones for the N/S front bumper fixing point where there is no tow eye, and the longer ones for the O/S front point where the tow eye is  fitted.  If you buy from them make sure they supply the longer ones.  Having said that, it might be worth checking the thickness of the loop that you have.  IIRC the difference between the two types was only about 5 -10 mm.  

Anyone who has bought replacement front tow hooks should have been supplied with replacement bolts too.  My replacements were supplied with Allen key headed bolts instead of T55.  Unfortunately I've already given my longer T55s away, but anyone who has fitted front tow hooks should have the longer T55s kicking around.  

Any reputable bolt and fixing supplier should be able to help you out - but I think you'll need to use high tensile bolts for that sort of application.  Hope this helps.
Logged

Anonymous

  • Guest
(No subject)
« Reply #12 on: April 22, 2006, 10:52:10 PM »
Pop to your local engineering type place, they always charge me a quid for any bolts I want and shove it in their tea kitty.... just make sure they are "Grade 8" or whatever it's called... the strong ones...  take your existing bolt with you and they'll usually match it up pretty quick...
Logged

Anonymous

  • Guest
(No subject)
« Reply #13 on: April 22, 2006, 11:01:22 PM »
Think it is grade 8
Dinstock in Hortonwood Telford sorted me out

Gaz if you need 4 pm me and I'll post them
Logged

Anonymous

  • Guest
(No subject)
« Reply #14 on: April 23, 2006, 12:03:05 AM »
Cheers guys  :wink:

Stew, you have PM
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal