Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Lifting flat springs  (Read 2520 times)

0 Members and 3 Guests are viewing this topic.

mattgreen84

  • Guest
Lifting flat springs
« on: January 20, 2016, 09:04:02 PM »

Gents,

I have a 96 XJ which has rather flat rear leafs (leaves?).

Would a budget lift kit with an add a leaf work, only want a mild lift to potentially go slightly larger tyres at some point in the future.

Sent from my SM-G925F using Tapatalk

Logged

wildwood

  • The 1 Tonne Kid
  • Marshal
  • Forum Member
  • *
  • Guru: 14
  • Offline Offline
  • Posts: 5921
Re: Lifting flat springs
« Reply #1 on: January 20, 2016, 11:07:12 PM »

Springs off a diesel XJ will give you a small lift.
Using an add a leaf will give a harsher ride.
Logged

mattgreen84

  • Guest
Re: Lifting flat springs
« Reply #2 on: January 21, 2016, 12:00:35 AM »

What about the longer shackle kits? I know Llama do them, and for £not much thought it might be worth a go, but don't wanna mess anything up?

Sent from my SM-G925F using Tapatalk

Logged

wildwood

  • The 1 Tonne Kid
  • Marshal
  • Forum Member
  • *
  • Guru: 14
  • Offline Offline
  • Posts: 5921
Re: Lifting flat springs
« Reply #3 on: January 21, 2016, 09:30:21 AM »

Longer shackle kits will lift but you're lifting a tired and knackered spring... Eventually it will, if not already, look like a 'non smiley' profile......and the ride will get worse.
Lifting only the rear of the spring will nett you half the advertised length of the shackle. It might mess with the pinion angle of the diff, meaning wedges are needed under Spring to correct.
Logged

Green Jeep

  • Guest
Re: Lifting flat springs
« Reply #4 on: January 21, 2016, 05:33:10 PM »

 :iagree: Flat springs can't be lifted as they are at the end of their life.... Jones Spring http://www.jones-springs.co.uk/ can bring back tired springs, improve them, replace broken leafs what ever is needed... they stock standard Cherokee and Cherokee diesel ones.... so either buy new stock springs and then shackle lift or ask them about making springs to suit your needs.

I have used Jones' a few times, they have replaced broken leafs and turned them around within 24 hours.

How high are you going? What size tyres are you aiming for? How are you lifting the front?

Would suggest staying away from AAL as you have one tough leaf and over time it weakens the others and the ride is awful, better to get a complete new leaf pack imho.

Hope this helps, Maf
Logged

mattgreen84

  • Guest
Re: Lifting flat springs
« Reply #5 on: January 22, 2016, 10:35:36 PM »

Awesome advice all round ta! Don't really want much lift at all, currently mine is pretty tidy and standard looking with Grabber ATs and a snorkel, and that's about it. Don't wanna go silly, but maybe an inch or two? Was thinking just spring spacers on the front.

Sent from my SM-G925F using Tapatalk

Logged

General Confusion

  • Marshal
  • Guru
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 306
  • Vehicle: Now Jeep-less
  • Buckle Up!!!!!..........I want to try something.
Re: Lifting flat springs
« Reply #6 on: January 23, 2016, 10:58:03 AM »

A set of Mansfield heavy duty springs at the rear and spacers at the front will give you a 2" lift for about £200
Logged
Too Old to Die Young!!!!
Pages: [1]   Go Up
 

Powered by EzPortal