Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Sooty Si]

Hey all,

So I'm replacing the outer LH front CV joint, but the hub bolts heads (P/no. 34201535) are fooked. Got one out by hammering a 1/2" socket on to it and applying some heat and a breaker bar. The other 2 are no-go's - heads rounded off (would like to meet the clown who fitted the last hub, in a dark alley with abovementioned breaker bar). Going to have to grind the heads off and replace all 3.

Anyway, anyone know where in the UK I can source some replacement bolts? £26 on eBay seems a bit steep for 3 bolts.

[scrw]

Lighthouse jeep in Diss, however iirc last time I got some from them they were around 7quid each

[Sooty Si]

Jesus wept!

And I'm about 100 miles from Diss.

Bugger!

Back to Jeepey Mart then...cheers mate!

[wildwood]

They do next day delivery....they will be the correct parts as well

[Sooty Si]

Sorted, cheers! Bloody hell, they were tight! Had to get all medieval on them. All out and cv joint replaced.

[AVR2]

Dumb question, but wouldn't generic 10.9 bolts of the correct length and thread pitch work? Or are the hub bolts special apart from requiring a 12-point socket?

I had my ZJ hubs off and on many times, but the bolts didn't seem unusual.

[Sooty Si]

Replaced the CV joint but the noise was still there. Bit the bullet and replaced the wheel bearing as well - bought one that came with new bolts. However, a local hardware store were able to supply me with 3 high-tensile steel bolts of the same thread pitch for about £2.70.