Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Just fitted a new PCB on 2.7 crd shifter  (Read 9069 times)

0 Members and 1 Guest are viewing this topic.

moWJoe

  • Guest
Just fitted a new PCB on 2.7 crd shifter
« on: November 09, 2016, 09:52:26 PM »
I had P0340 and P0702 codes, told to ignore the camshaft code, so replaced PCB on shifter but the MIL light is still on and still in limp home mode after deleting the code.
Any thoughts welcome, cheers
Logged

oneof24orless

  • Guest
Just fitted a new PCB on 2.7 crd shifter
« Reply #1 on: November 09, 2016, 10:14:02 PM »
Have you looked here...

http://jeepswj.com

Sent from my iPhone using Tapatalk
Logged

moWJoe

  • Guest
Re: Just fitted a new PCB on 2.7 crd shifter
« Reply #2 on: November 09, 2016, 10:20:08 PM »
Yep, the same place i got the PCB from.
Logged

jay140285

  • Guest
Re: Just fitted a new PCB on 2.7 crd shifter
« Reply #3 on: November 10, 2016, 05:47:01 AM »
Was the PCB the exact same part number?

If it isn't it won't work. I had to replace one and that's what you have to ensure

Sent from my BV6000 using Tapatalk

Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal