Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Steering Stabilizer question  (Read 12692 times)

0 Members and 1 Guest are viewing this topic.

ExtremeTJ

  • Guest
Steering Stabilizer question
« on: June 20, 2006, 01:34:16 PM »
I am looking for an alternative method of mounting the steering stabilizer, the problem is that when ever I mount one in the standard place the steering arm trashes it,,,,,,,,,,just fitted a nice new procomp one today and befofe I even pulled the TJ out of the drive oil every where.

I do have a skyjacker one that I had mounted onto the axle tube but it hangs really low and will end up being damaged off roading.

Has anyone else had or having this problem?

Suggestions please.
Logged

isle of man

  • بعض العضو التناسلي النسوي...
  • Club Member
  • Guru
  • *
  • Guru: 6
  • Offline Offline
  • Posts: 11537
  • Vehicle: G-Class AKA “The G spot”
  • Take the road less travelled...
    • http://www.4x4.im
(No subject)
« Reply #1 on: June 20, 2006, 02:18:52 PM »
mount it high like this....




peter henry
Logged
"Not all those who wander are lost"

ExtremeTJ

  • Guest
(No subject)
« Reply #2 on: June 20, 2006, 02:56:52 PM »
thats what I thought.
Logged

thorna

  • Guest
(No subject)
« Reply #3 on: June 21, 2006, 11:55:00 AM »
Hey Richard, see your experiencing the same as me- nobody else seems to mind! My latest Procomp one did the same as yours and it was significantly smaller than the Black Diamond i had previously!
  I've seen installs like Isel Of Man's where there the original mount has been welded & extended.
But what would be really good is a bolt on bracket;
Like the one FTE do to relocate the rear track bar on lifted RHD jeeps- very expensive for what it is but it does the job!
Anybody want to make one up & sell it over the odds?
Save having a new damper every MOT!
Logged

ExtremeTJ

  • Guest
(No subject)
« Reply #4 on: June 22, 2006, 09:14:08 PM »
Sounds like a plan. :-k
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
(No subject)
« Reply #5 on: June 22, 2006, 09:34:04 PM »
it cant be to hard to make
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

ExtremeTJ

  • Guest
(No subject)
« Reply #6 on: June 22, 2006, 09:46:59 PM »
Had one before, it was just a flat plate tack welded onto the original mount, I do have a few trackbar brackets lying about so I will see what I can mock up.
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal