Topic: Its been asked a thousand times but................... (Read 10401 times)

keeko · « **on:** July 25, 2006, 01:24:45 PM »

I `m not sure and its easier than surfing. Does the later model Cherokee 2002 onwards (Liberty thingy) wheels fit the older models ( 93-2001)?

Anonymous · « **Reply #1 on:** July 25, 2006, 01:34:54 PM »

nope!!!

keeko · « **Reply #2 on:** July 25, 2006, 05:25:55 PM »

.............shit........

Mike Pavelin · « **Reply #3 on:** July 25, 2006, 06:39:23 PM »

They do fit, but the backspacing is wrong so they look real skinny unless you use spacers to move them out a bit. Oh, and they're 16 inch.

Plum · « **Reply #4 on:** July 26, 2006, 08:51:24 AM »

I thought (and please correct me if im wrong) that pre 1999 all jeep wheels where 4.5" BCD and from then onwards they where altered to 5.0" BCD . . .

Is that right or wrong ? ? ? ?

chrisjones · « **Reply #5 on:** July 26, 2006, 10:24:18 AM »

XJ, TJ and YJ are 5 on 4.5 as are pre '97 (I think) ZJ's

CJ 5 on 5.5

Not sure about the newer stuff or FSJ's, but someone else will know.

I have a feeling some of the FSJ's are 6 stud.

tim_aka_tim · « **Reply #6 on:** July 26, 2006, 10:51:21 AM »

http://http://www.discountedwheelwarehouse.com/Jeep___Vehicle_Bolt_Pattern_Reference.cfm

Mike Pavelin · « **Reply #7 on:** July 26, 2006, 08:36:21 PM »

KJ are 4.5" PCD like nXJ, TJ, ZJ, YJ.
CJ, WJ and WK are 5.5PCD.

Plum · « **Reply #8 on:** July 27, 2006, 08:37:01 AM »

ahhhhh ! ! ! . . . . . noted Mike . . . . .

Author Topic: Its been asked a thousand times but................... (Read 10401 times)

keeko

Its been asked a thousand times but...................

Anonymous

(No subject)

keeko

(No subject)

Mike Pavelin

(No subject)

Plum

(No subject)

chrisjones

(No subject)

tim_aka_tim

(No subject)

Mike Pavelin

(No subject)

Plum

(No subject)