Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: KJ brakes  (Read 4957 times)

0 Members and 1 Guest are viewing this topic.

thebluebus

  • Guest
KJ brakes
« on: April 19, 2007, 08:02:23 AM »

When the Blue Bus was in at the stealership for the LBJ recall yesterday, they decided she needs new front discs and pads.

They want £333 for the job.

Is this extortionate? Anyone recommend a jeep specialist who's cheap and good?

I'm in North Essex.  :roll:
Logged

tim_aka_tim

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
(No subject)
« Reply #1 on: April 19, 2007, 08:19:28 AM »

A quick look online says that new pads and discs all round would be about £170 for the parts. You really don't need a Jeep specialist to do the job, there's nothing special about it.

£333 sounds remarkably cheap for a stealership, given that the cost of mopar parts is markedly higher. Still, I'd either do it myself or take it to your local backstreet garage where labour isn't £120 an hour. Ask people you work with for a recommendation.
Logged

MOCAJ

  • Club Member
  • Forum Member
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 6366
(No subject)
« Reply #2 on: April 19, 2007, 10:14:26 AM »

have a go yourself, you will save £££££

and you will get to know your truck  8)
Logged
short term jeep owner since 2005, every truck is a never ending project. Birtys, the best club in Jeepland

thebluebus

  • Guest
(No subject)
« Reply #3 on: April 19, 2007, 10:46:10 AM »

I guess I could give it a go.

I have got the Haynes book, and I am an engineer.  :oops:
Logged

tim_aka_tim

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
(No subject)
« Reply #4 on: April 19, 2007, 10:54:33 AM »

Just need to set aside plenty of time and not worry too much. You're not going to touch the hydraulics, just unscrew some bits and bolt on new ones.

However, don't just take the dealer's word for it, they're possibly just touting for business when there's still plenty of miles left on the discs especially.
Logged

tag

  • Guest
(No subject)
« Reply #5 on: April 19, 2007, 02:00:40 PM »

Yeah' find a write up with nice pics, it's not that hard to do.  a friend was quoted £160 for oil change and filter on a disco recently, he told them to f%%ck off and did it himself took about 30-45 mins.........
Logged

Sam

  • Guest
(No subject)
« Reply #6 on: April 19, 2007, 04:02:58 PM »

Yeah do it yourself, i did and if i can im sure you can. cost me less than £100 to replace brakes on all wheels (discs, shoes and pads)
Logged

thorna

  • Guest
(No subject)
« Reply #7 on: April 19, 2007, 05:48:36 PM »

Yeah the new brake disk 'call':
my local Stealership claimed at a service at around 37k mile that my TJ needed new discs for 300quid; I refused & later other garage said they were fine; I'm currently at 92k & still haven't needed to change them!
Pads are different; eaten plenty of them!
Logged

tim_aka_tim

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
(No subject)
« Reply #8 on: April 19, 2007, 09:00:07 PM »

Well judging by the pics in the general forum, you DO need new discs, on the front at least. Bummer.
Logged
Pages: [1]   Go Up
 

Powered by EzPortal