July 06, 2025, 10:33:27 AM
Welcome,
Guest
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Forum
Help
Login
Register
GALLERY
Unread
Events
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
hello and help with a flat battery
« previous
next »
Pages: [
1
]
Go Down
Print
Author
Topic: hello and help with a flat battery (Read 8264 times)
0 Members and 1 Guest are viewing this topic.
bendee
Guest
hello and help with a flat battery
«
on:
January 02, 2008, 09:54:00 PM »
hello all,
I'm in France and stupidly left my keys in the ignition to play a cd whilst cutting a hedge (yeah i know i asked for it
) and totally forgot and now have a completely flat battery. I do have a 12v battery charger in the garage and my question is am I safe to use it on my Jeep Cherokee 2.8CRD Ltd Auto? It's a diesel if that makes any difference. Does anyone have any tips for charging?
here's hoping,
David
Logged
MOCAJ
Club Member
Guru
Guru: 4
Offline
Posts: 6366
(No subject)
«
Reply #1 on:
January 02, 2008, 10:14:47 PM »
hi david and welcome to the club
please try to put an intro but it shud be fine just charging the batt
if the alarm plays up just try setting/ unsetting it before starting
steve
Logged
short term jeep owner since 2005, every truck is a never ending project. Birtys, the best club in Jeepland
tim_aka_tim
Club Member
Guru
Guru: 1
Offline
Posts: 4464
Vehicle: Honda Pilot
Year: 2008
Regional Organiser North America
(No subject)
«
Reply #2 on:
January 02, 2008, 10:25:45 PM »
Or get a jumpstart and take it down the motorway for a razz, much quicker.
Logged
GermanXJ
Guest
(No subject)
«
Reply #3 on:
January 03, 2008, 07:50:58 AM »
If you need any help wrenchin on anything let me know. I am located in soutwestern Germany we have a small club here, and would love to help ya out if you need it.
Logged
JamesH
Club Member
Guru
Guru: 1
Offline
Posts: 4998
Vehicle: JK
Year: 2010
(No subject)
«
Reply #4 on:
January 03, 2008, 08:45:45 AM »
I would say it'll be fine, especially if it's a normal charger and not a 'fast' one. If the battery is completely flat then Tim's idea is not ideal to fully charge as the alternator requires a certain level of voltage from the battery to charge it properly (but that's only a problem if it's really flat). What ever you do, don't leave it flat for too long as it can cause damage to the battery.
Logged
bendee
Guest
thanks
«
Reply #5 on:
January 03, 2008, 08:46:06 AM »
guys-
thanks for the advice/offers of help. What a fantastic forum- i'm charging now as have no jump leads with me.....now where did i put that stereo code.......
Logged
GermanXJ
Guest
(No subject)
«
Reply #6 on:
January 03, 2008, 06:30:04 PM »
A lot of batteries have two caps on the top. If you have them on yours, pop them off with a screwdriver, and have a look inside. You should be able to see liquid in the holes. The level of the water is supposed to be at the bottom of the plastic tabs. If it is not the battery will not hold a charge. All you have to do is add a little distilled water if its low, and your set.
Logged
Mike Pavelin
Guest
(No subject)
«
Reply #7 on:
January 03, 2008, 07:13:19 PM »
KJ CRDs have a red top Optima as standard. The're Gel filled so don't bother trying to open it, you'll break it. Also, a standard charger isn't the best thing for it either, so charge it on a low setting for 24 hours.
Logged
bendee
Guest
started
«
Reply #8 on:
January 03, 2008, 08:39:36 PM »
I charged for about 5 hours and it started first time. I drove around for some time and have just tried starting again and it started fine so fingers crossed......
Thanks again folks for all the brilliant advice.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
hello and help with a flat battery
Powered by
EzPortal
Go Up
Go Down