Topic: Box section sills (Read 5140 times)

mcbungie · « **on:** February 13, 2008, 09:46:47 AM »

Hi my 95 xj`s sills r gone so im going down the box section route. Ive read dtooths post which is very helpfull. just wondering if anyone else has done this, and if you have any hints or pointers for me.. thanks

Mike Pavelin · « **Reply #1 on:** February 13, 2008, 11:35:44 AM »

Remember the sills take the load of the seatbelt when you crash so make sure the seatbelt anchorage is either welded into the box section or the section of inner sill with the anchorage is welded to the box section securely.

dtooth · « **Reply #2 on:** February 13, 2008, 12:41:46 PM »

Do one side at a time my biggest problem was welding the underside my mig wasn't up to it .

heres some more write ups

http://4x4trailhunters.com/article.php?id=17

http://www.pirate4x4.com/tech/billavist ... ockers.htm

greggmo · « **Reply #3 on:** February 13, 2008, 08:46:08 PM »

we did the box section sills on chris jones's xj. piece of piss and it stiffens em up a load. chris's is on this month of the calendar if ya wanna see it. 8-)

tim_aka_tim · « **Reply #4 on:** February 13, 2008, 08:55:31 PM »

Yeah, the work Dumb and Dumber did on Jona's Cherry is here http://www.birtydastardsjeepclub.com/fo ... php?t=5628

Author Topic: Box section sills (Read 5140 times)

mcbungie

Box section sills

Mike Pavelin

(No subject)

dtooth

(No subject)

greggmo

(No subject)

tim_aka_tim

(No subject)