Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: 1999-2004 GCK sport 2.7 CRD ball jolnt tools ?  (Read 6767 times)

0 Members and 1 Guest are viewing this topic.

philfromrowley

  • Forum Member
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 1
  • Vehicle: Grand Cherokee CRD WJ
  • Year: 2004
1999-2004 GCK sport 2.7 CRD ball jolnt tools ?
« on: September 28, 2024, 08:06:09 PM »
 
Hi guys, my 1st post so if i get this wrong pls advise, i am looking for a reasonably priced, poss from Amazon ball joint press and remover tool kit , any suggestions for a proven kit which works OK. Thanks Phil.
Logged

Jonny Jeep

  • Regular Member
  • Forum Member
  • *
  • Guru: 11
  • Offline Offline
  • Posts: 1372
  • Vehicle: TJ 4.0 Sport
  • Year: 1997
Re: 1999-2004 GCK sport 2.7 CRD ball jolnt tools ?
« Reply #1 on: September 29, 2024, 05:01:29 PM »
A branded kit would probably cost hundreds so any cheap chinese copy that has the angled 4wd adapter would do the job. Get it good and tight then smack the end of the knuckle with a BFH. Try with just a normal ratchet to get it tight and if it won't break free move on to a strong arm. If they've been in for a long time the first movement will come with almighty bang. After that it will get easier.

Anything like this will do...
https://www.amazon.co.uk/BOOMSTART-Universal-Repair-Remover-Installer/dp/B096KFDTXS

Here's a Lisle branded one...
https://www.amazon.co.uk/Lisle-43620-Joint-Anchor-U-Joint/dp/B000HHV49M
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal