Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Engine mounts!  (Read 7360 times)

0 Members and 1 Guest are viewing this topic.

tag

  • Guest
Engine mounts!
« on: June 26, 2008, 01:04:17 AM »
Looks like i need a new engine mount  near side,  off side is on it's way too. thats why i get a knock on start up!!   polly or rub ?........
Logged

dtooth

  • Guest
(No subject)
« Reply #1 on: June 26, 2008, 04:16:34 AM »
i have a set of poly ones you get some more engine noise than normal but very solid

i brought a few pairs from the stats from these people  http://browndogindustries.com/

i may have a pair left i think £50 the pair plus p&p if your interested .

will need to check  :oops:
Logged

tag

  • Guest
(No subject)
« Reply #2 on: June 27, 2008, 09:17:01 PM »
D, could be interested, ............i have the triangle type and the rubber is only bonded at the bottom is this normal? or is it failing?....cheers
Logged

dtooth

  • Guest
(No subject)
« Reply #3 on: June 28, 2008, 03:47:45 AM »
Heres a picture of a normal mount on left looks like its joined to the metal all way round .

http://www.jpmagazine.com/howto/31818/photo_06.html


been a while since i did mine and my las tones were very poor probably caused the ehaust manifold to split
Logged

dtooth

  • Guest
(No subject)
« Reply #4 on: June 28, 2008, 09:08:48 PM »
i do have the mounts if you want em
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal