Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Roof rail cross bars  (Read 5662 times)

0 Members and 1 Guest are viewing this topic.

pajero

  • Guest
Roof rail cross bars
« on: September 27, 2008, 11:33:17 AM »
Any ideas on how to release the end fastening on these?  The button on one has gone solid and therefore I cant move the bar. :wink:
Logged

Tank

  • Guest
(No subject)
« Reply #1 on: September 27, 2008, 11:43:13 AM »
Maybe button has seized through lack of use.You could try a penetrating oil or WD40 maybe.Apply a few times and leave to soak in,then tyr it,maybe using a bit of gentle persuassion at the same time,just a suggestion
Logged

Panic mechanic!

  • Guest
(No subject)
« Reply #2 on: September 27, 2008, 12:10:27 PM »
i did mine with  some wd 40 then a  small hammer, just tapping gently then they free'd off, its usually just clogging things up a bit
Logged

Bishops Finger

  • Guest
(No subject)
« Reply #3 on: September 27, 2008, 12:29:23 PM »
WD 40 and press the buttons on a regular basis to keep them free...
Logged

pajero

  • Guest
(No subject)
« Reply #4 on: September 28, 2008, 12:09:00 PM »
Thanks for replies.  Done the WD40 and physical persuasion but to no effect.  Bought the truck with the damn thing stuck, I was hoping for a more technical fix than a hammer!  Even in several different sizes. :oops:
Logged

Bishops Finger

  • Guest
(No subject)
« Reply #5 on: September 28, 2008, 04:45:00 PM »
Stick screwdriver in here is NOT an option ....been there done that and ended up phoning Lighthouse :shock:
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal