Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mikesknives]

can the adjustable ball joints on the later XJ be replaced with a standard one?

[Mike Pavelin]

Adjustable ?

[mikesknives]

I haven't managed to get it out yet so I don't know wether it has any locating point but the shaft is offset and if you don't put it in the right place it will affect caster/camber settings.  I see that they fit them in the US as an adjustable joint with a set up kit but not sure if this is stock?  I'm fairly sure about most of the vehicles history and I'm sure it is.

Any thoughts?

[Bubba]

yes if you eat a whole packet of chedders bikkys they burn ya tongue
why

[Dave69]

yes if you eat a whole packet of chedders bikkys they burn ya tongue
why

I had to think twice about that one




adjustable ball joints as far as i can remember are only an aftermarket fitment sourced from the states

[Mike Pavelin]

They were a warranty fix to tweak the camber/caster if customers complained of pulling to one side.Usually found on ZGs, never come an XJ having them. A stock one is a straight swap.

[wazza]

yes if you eat a whole packet of chedders bikkys they burn ya tongue
why