Topic: T18 transmission (Read 14013 times)

xr6jeeper · « **on:** December 03, 2008, 11:47:19 AM »

Ok all you tech heads, nows youre time to shine.
Ive located a t18 out of a cherokee, so what i need to know is,

1 Will it be a short shaft
2 are jeep t18s different to ford t18s what i mean is, is the bellhousing bolt pattern at the transmission end different.
My engine is a tickford xr6 ford, ive got 2 brand new ally bellhousings with the 4 hole pattern at the tranny end. I could allways machine an adaptor plate but it would be nice if i could just bolt something straight on for a change :-)

Geoff.

isle of man · « **Reply #1 on:** December 03, 2008, 08:22:05 PM »

Good question - I also would like to know

Bubba · « **Reply #2 on:** December 04, 2008, 07:24:18 PM »

i am fairly sure i have the info in a cross referance book somwhere

but from the top of my head i think
short shaft yes
tranny patern same bellhousing to engine not

wildwood · « **Reply #3 on:** December 05, 2008, 10:44:09 AM »

Cherry had long shaft and huge bell housing to get gear stick back from under dash.
Best to google this or look at Pirate website for rebuild info and there is lots.
Off top of head 'Hicks" do a short shaft and T18 rebuild kit and you need later CJ gearbox from T176 (I think) T18s are configured to run Dana 20 so Advance adapters are your best shot if you are running some'at else.
As I said I researched this earlier in year and just google it and you'll have an evenings reading and resources to use.
Sorry can't help with Ford stuff. but think T18s from Fords are short shaft.

xr6jeeper · « **Reply #4 on:** December 05, 2008, 11:10:58 AM »

Quote from: "wildwood"

Cherry had long shaft and huge bell housing to get gear stick back from under dash.
Best to google this or look at Pirate website for rebuild info and there is lots.
Off top of head 'Hicks" do a short shaft and T18 rebuild kit and you need later CJ gearbox from T176 (I think) T18s are configured to run Dana 20 so Advance adapters are your best shot if you are running some'at else.
As I said I researched this earlier in year and just google it and you'll have an evenings reading and resources to use.
Sorry can't help with Ford stuff. but think T18s from Fords are short shaft.

Yep ive been looking into it, and the transmission i need is the ford t18 because it has the 6.5 inch input shaft, as opposed to the jeep t18 ive found which has a 15.5 inch shaft. What a bummer!
I could get the short shaft kit , and the adapter plate to put my dana 300 on the back but im looking at loads of sheckles, and things are tight at the moment.
Cheers guys.

Bubba · « **Reply #5 on:** December 05, 2008, 05:02:32 PM »

why have you plumped for t18

xr6jeeper · « **Reply #6 on:** December 05, 2008, 09:57:47 PM »

Well firstly they are bullet proof, secondly the majority have a 6.32:1 first gear ratio, so it will crawl over anything. Its also a fairly short box (about the same as a sr4) and you can buy adapters for most engines and transfer boxes. The only negative thing about the t18 is the fact it has no syncro in 1st gear, but im not fussed. :-)

Why! have you got a better idea? Fire away dude.

wildwood · « **Reply #7 on:** December 05, 2008, 11:33:58 PM »

There was a rare box with synchro on 1st called the T19 same deal just with synchro.
People that have them just drive them on the street as a three speed and leave the first gear for off road.
And here's the link about converting to short input from long input, just found it how retentive is that? http://www.jeepfan.com/projects/t18_swap.htm.

xr6jeeper · « **Reply #8 on:** December 06, 2008, 12:13:48 AM »

Yep thats right, but acording to this it has a 4.1 first gear(ford)
Ill do some more searching cheers.
http://offroaders.com/tech/Diagrams/T19.htm

Bubba · « **Reply #9 on:** December 06, 2008, 11:28:31 AM »

i have heard about the t19 but feel auto is far better

xr6jeeper · « **Reply #10 on:** December 06, 2008, 12:51:53 PM »

The only auto trans that fits is a 6 speed zf (loadsa spondoolies) and then id have to adapt the dana 300 on the back (loads more spondoolies) i spose i could sell a kidney, or maybe my left nacker, either way im up the creek without a paddle.
http://www.autocar.co.uk/CarReviews/Fir ... bo/232547/

Bubba · « **Reply #11 on:** December 06, 2008, 01:58:17 PM »

i see its a funny engine you have i meant to ask more about it when you first posted but forgot [dumbass] please tell us more about it what it normaly is fitted to an such

xr6jeeper · « **Reply #12 on:** December 07, 2008, 11:25:15 AM »

Have a look at this bub, mines the last engine at the bottom of the list, ill dig out a pic :-)

.
http://autospeed.com/cms/article.html?&A=0249

Bubba · « **Reply #13 on:** December 07, 2008, 11:33:41 AM »

the tickford version :?:

xr6jeeper · « **Reply #14 on:** December 08, 2008, 12:12:32 AM »

Quote from: "V8 Bubba"

the tickford version :wink:

Bubba · « **Reply #15 on:** December 08, 2008, 05:11:48 PM »

hmm very nice indeed if i was placed to buy a crate engine i think i would go for chevy vortec as it works so well with jeep stuff

tim_aka_tim · « **Reply #16 on:** December 08, 2008, 05:30:24 PM »

Here's a cool transplant for a Jeep....

An XJ with a Duramax!!!!

Bubba · « **Reply #17 on:** December 08, 2008, 06:37:07 PM »

shit i gotta go change my shorts :oops:

xr6jeeper · « **Reply #18 on:** December 08, 2008, 07:04:05 PM »

Come on then info :-)

xr6jeeper · « **Reply #19 on:** December 08, 2008, 07:14:21 PM »

Quote from: "V8 Bubba"

hmm very nice indeed if i was placed to buy a crate engine i think i would go for chevy vortec as it works so well with jeep stuff

I had a corvette engine and trans (6 speed) a few years back, but had to sell it when a guy offered me silly money, :-(

Author Topic: T18 transmission (Read 14013 times)

xr6jeeper

xr6jeeper

xr6jeeper

xr6jeeper

xr6jeeper

xr6jeeper

xr6jeeper

xr6jeeper

xr6jeeper