Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: cherokee jeep centre console  (Read 5613 times)

0 Members and 1 Guest are viewing this topic.

dougal

  • Guest
cherokee jeep centre console
« on: December 29, 2008, 04:13:12 PM »
1998 cherokee jeep 2.5 td se  uk model
just had my jeep for a few weeks and despite having to lash out many pounds for a new no 1 injector (i checked this easily with a resistance meter), and springing a leak from the heater matrix. i love it.

been having a good natured discussion with usa on removing the centre floor console.
  despite many attempts by some very skilled friends, it seems the handbrake has to be come out or at least slackened off .however american owners state categorically that the hand brake can be left in place, the fsm also makes no mention of removing the handbrake.

(it would only take a few minutes to do but i use the vehicle daily so i dont want to disturb any thing mechanical at the moment)help
 regards
doug
Logged

scrw

  • Guest
(No subject)
« Reply #1 on: December 29, 2008, 04:50:03 PM »
I have taken one out, will have a looksee tomorrow at mine
Logged

dougal

  • Guest
(No subject)
« Reply #2 on: December 29, 2008, 04:58:38 PM »
thanks steve,

oddly enough jeep came from stockport...

dougal
Logged

dougal

  • Guest
(No subject)
« Reply #3 on: December 29, 2008, 05:06:40 PM »
ps.
(im removing carpets to dry them  out following the leak.)
anone attempting this should watch out for removal of the gearknob, manual says slacken off locknut. but makes no mention of the fact that its almost impossible without damaging the shift pattern and/or gear knob.
Logged

Dave69

  • Club Member
  • Forum Member
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
(No subject)
« Reply #4 on: December 29, 2008, 07:34:05 PM »
the handbrake doesn't have to be removed. put the jeep in gear and release the handbrake, move the handbrake lever slightly up or down to allow the box console part to slide over. yep it's awkward but thats how its done. did one on a 2.5 petrol the other week
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

dougal

  • Guest
centre console
« Reply #5 on: December 29, 2008, 10:01:32 PM »
thanks dave, i cant really argue with that,but as there is only room to move the console unit forward about an inch the handbrake lever would have to go almost vertical, we have stretched the cable already.
also we tried removing the power/switch panel and tried lifting the front first
but no joy, unless we're missing something.

your reply was much appreciated

dougal

ive removed the electronic module so ive only a couple of bolts now when the weather improves.
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal