Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Ford 8.8 rear axle  (Read 7001 times)

0 Members and 2 Guests are viewing this topic.

scrw

  • Guest
Ford 8.8 rear axle
« on: May 14, 2009, 10:22:01 PM »
Has now been collected, bargain for £50, complete with disks too  :-D
Logged

greggmo

  • Founder
  • Forum Member
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 8230
Re: Ford 8.8 rear axle
« Reply #1 on: May 15, 2009, 11:23:43 PM »
8-)
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
Re: Ford 8.8 rear axle
« Reply #2 on: May 16, 2009, 08:53:04 AM »
i look forward to lots of pics an updates
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

scrw

  • Guest
Re: Ford 8.8 rear axle
« Reply #3 on: May 16, 2009, 08:36:36 PM »
install kit is coming from here http://www.mountainoffroad.com/Catalog/ ... llkit.html

Also getting a prop flange adaptor from them.
The ford axle certainly looks stronger than the dana35, will rebuild the brakes & put new solid lines, disks & pads on too, only plan to do this once
Logged

JamesH

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4998
  • Vehicle: JK
  • Year: 2010
Re: Ford 8.8 rear axle
« Reply #4 on: May 17, 2009, 01:50:22 PM »
It's a good and strong axle and it'll take big tyres and horsepower quite easily. The only thing to bear in mind is the size of the diff pumpkin, it's pretty big and you might have to negotiate it around obstacles offroad. It might be possible to shave some off the bottom too. Keep the build-up pics coming!  :-)
Logged

Dave69

  • Club Member
  • Forum Member
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
Re: Ford 8.8 rear axle
« Reply #5 on: May 17, 2009, 08:43:29 PM »
the guy's in the states shave a fair bit of the base to make it flat, then weld a substantial plate in the hole to allow for ground clearance.
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal