Topic: half shaft seal (Read 1913 times)

captain cavalier · « **on:** August 07, 2009, 10:10:46 AM »

How do I change a half shaft seal on a WJ

sprintagogo · « **Reply #1 on:** August 07, 2009, 11:32:35 AM »

Front axle or rear?

Either way it is quite involved but can be done by a good diy'er. I am about to do the rear axle seals on my XJ which should be similar but the fronts mean pulling the diff as the seals are next to the diff carrier bearings.

captain cavalier · « **Reply #2 on:** August 07, 2009, 11:59:16 AM »

sorry rear diff 2002 2.7crd

Bubba · « **Reply #3 on:** August 07, 2009, 02:05:22 PM »

never looked underneath one properly

sprintagogo · « **Reply #4 on:** August 07, 2009, 03:13:52 PM »

OH DEAR! I have dug around a little and it seems I am wrong, it is nowhere as simple as the XJ & ZJ rear hub seals

Look at this for more info - www.jeepsunlimited.com/forums/showthread.php?t=386086

For some reason I can't seem to open the link to the proper write-up on page 2 of the thread. Maybe you have to be a member to see it?

Hope this helps anyway, While you are at it make sure you check the axle breather isn't blocked or kinked as this can cause seepage even when the seals are ok.

daggie · « **Reply #5 on:** August 07, 2009, 05:46:41 PM »

they are an arse to do

Author Topic: half shaft seal (Read 1913 times)

captain cavalier

half shaft seal

sprintagogo

Re: half shaft seal

captain cavalier

Re: half shaft seal

Bubba

Re: half shaft seal

sprintagogo

Re: half shaft seal

daggie

Re: half shaft seal