Topic: Cable Run Question (Read 5257 times)

Rikk · « **on:** December 23, 2005, 10:24:12 AM »

Waaa Waaa Waaa /que incoming dumb question alert :umn:

CB aerials, I have it mounted on the bonnet and previously being the slack lazy git I am just run the cable in through the door. This worked well till the first big rain came and I had my own hot tub in the passenger footwell.

Soooo, where/how do I run a cable in through the bulhead? are there holes tucked away that can be used or is it a case of punching a hole through one of the rubber gaskets that other cables go through in pokeing it in there??

...........Rikk

Mike Pavelin · « **Reply #1 on:** December 23, 2005, 02:15:14 PM »

Follow the wiring for the radio aerial through the driver's kick panel out under the RH front wing area behind the plastic splash guard.

Bubba · « **Reply #2 on:** December 24, 2005, 10:18:25 AM »

or drill a hole in the wndscreen :twisted:

Rikk · « **Reply #3 on:** December 24, 2005, 10:30:27 AM »

It's a close thing, but after checking around for drills I can use on glass I think I'll go with Mikes suggestion

Cheers

.......Rikk

Author Topic: Cable Run Question (Read 5257 times)

Rikk

Cable Run Question

Mike Pavelin

(No subject)

Bubba

(No subject)

Rikk

(No subject)