Topic: Rear seat removal (Read 1378 times)

funkyboogalooo · « **on:** February 22, 2011, 02:48:45 PM »

Hi
Trying to completely remove the rear seats from my 98 Sahara TJ. All ive succeeded in doing so far is taking the skin of my knuckles several times.
Any ideas?
Cheers
Mike

Bishops Finger · « **Reply #1 on:** February 22, 2011, 02:54:16 PM »

IIRC fold them up to free rear clips then undo the front bolts??

And no you dont need to use a torque wrench

ivanidea · « **Reply #2 on:** February 22, 2011, 03:15:17 PM »

Bolts? Must have changed for my 2001 model.

As above, fold the seat up. From the cargo bay, look at the seat hinge on either side. There should be a retaining clip on the hinge bar (attached to the seat). Remove the clips, then slide the seat to one side and it you should be able to remove it from the bracket. Repeat on the other side. Replace clips on seat hinge so you don't lose them.

You only need a socket set if you need to remove the seatbelt fastners.

funkyboogalooo · « **Reply #3 on:** February 22, 2011, 05:42:28 PM »

Thanks both. I'll take a look again tomorrow now
Mike

MOCAJ · « **Reply #4 on:** February 22, 2011, 06:05:17 PM »

ivans method is correct for a 97/98

push one way and free from bracket, then the other way and its yours

Bishops Finger · « **Reply #5 on:** February 23, 2011, 12:49:10 AM »

I admit defeat...twas 5 years ago...

Author Topic: Rear seat removal (Read 1378 times)

funkyboogalooo

Rear seat removal

Bishops Finger

Re: Rear seat removal

ivanidea

Re: Rear seat removal

funkyboogalooo

Re: Rear seat removal

MOCAJ

Re: Rear seat removal

Bishops Finger

Re: Rear seat removal