Topic: 4.0L Straight 6 Throttle (Read 2595 times)

Tonka_Toy · « **on:** March 05, 2011, 11:52:13 AM »

Morning all,

I have had my new sensor and all fitted etc, however she doesn't seem to be running quite right. Does anyone have a guide etc on how to set up the throttle position as it seems to me that she is over fueling ( I haven't used her much so haven't been able to check the MPG ) The idle speed in park hunts between 1000 - 1250 rpm.

All thoughts and advice greatly appreciated.

TT

Panic mechanic! · « **Reply #1 on:** March 05, 2011, 02:38:24 PM »

check for any vacuum leaks to the manifold for a starter

isle of man · « **Reply #2 on:** March 05, 2011, 05:21:02 PM »

captain cavalier · « **Reply #3 on:** March 06, 2011, 09:50:07 PM »

have you tried disconnecting the battery for 5 mins

Tonka_Toy · « **Reply #4 on:** March 11, 2011, 06:11:21 PM »

I have tried disconnecting the battery. I was thinking prehaps a temperature sensor fault making the ECU think the engine is at running temperature. Does anyone know if the sensor default hot or cold?

TT

Jonny Jeep · « **Reply #5 on:** March 13, 2011, 04:25:02 PM »

temp sensors go open cicuit when bad making the computer think temp is -40

Author Topic: 4.0L Straight 6 Throttle (Read 2595 times)

Tonka_Toy

4.0L Straight 6 Throttle

Panic mechanic!

Re: 4.0L Straight 6 Throttle

isle of man

Re: 4.0L Straight 6 Throttle

captain cavalier

Re: 4.0L Straight 6 Throttle

Tonka_Toy

Re: 4.0L Straight 6 Throttle

Jonny Jeep

Re: 4.0L Straight 6 Throttle