Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Iron Man Springs for WJ  (Read 1297 times)

0 Members and 1 Guest are viewing this topic.

charger

  • Guest
Iron Man Springs for WJ
« on: April 06, 2011, 08:06:32 PM »

Any one know anything about these, I have found a place selling a set for the right p ££. They call em 2" lift springs yet the part no says 40mm which is not 2". I they were 40mm I could use them with my 2" puck lift I think & get away with it.
Logged

isle of man

  • بعض العضو التناسلي النسوي...
  • Club Member
  • Forum Member
  • *
  • Guru: 6
  • Offline Offline
  • Posts: 11537
  • Vehicle: G-Class AKA “The G spot”
  • Take the road less travelled...
    • http://www.4x4.im
Re: Iron Man Springs for WJ
« Reply #1 on: April 06, 2011, 08:10:24 PM »

Australian normally very good quality - I don't have any experience of these but did consider them for the 75.
Logged
"Not all those who wander are lost"

JamesH

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4998
  • Vehicle: JK
  • Year: 2010
Re: Iron Man Springs for WJ
« Reply #2 on: April 06, 2011, 10:00:36 PM »

I knew someone who fitted a 2" IronMan kit to an XJ and has since sold it and it's being heavily abused now, 6 years on - seems robust but I can't speak for road holding, comfort etc.
Logged

nomadsz

  • Guest
Re: Iron Man Springs for WJ
« Reply #3 on: April 08, 2011, 07:20:32 PM »

Any one know anything about these, I have found a place selling a set for the right p ££. They call em 2" lift springs yet the part no says 40mm which is not 2". I they were 40mm I could use them with my 2" puck lift I think & get away with it.

I used iron man springs on my Pajero and they were far better then the stock spings, These are almost the default replacment spring in the world of Pajeros as they are seriously tough and offer good comfort.
Logged
Pages: [1]   Go Up
 

Powered by EzPortal