Topic: Circlip Tool (Read 1213 times)

Norm · « **on:** April 23, 2011, 01:48:09 PM »

Is it a special type of circlip tool or just use normal ones. I'm trying to get transfer box end housing,where the prop comes out off. Thanks.

Warthog · « **Reply #1 on:** April 25, 2011, 12:46:34 AM »

Pretty sure they are Internal/External Snap Rings (Little different to Circlip) Pesky buggers to remove, until you've done a few. If Circlip pliers wont work? Have had success with a couple of flat head screwdrivers to pry them out (internal)

http://www.springmasters.com/circlips.html (half way down page)

http://www.willystech.com/wt/T90RebuildGuide/Pictures/RearBearingSnapRing.jpg

Norm · « **Reply #2 on:** April 25, 2011, 08:02:32 AM »

Thanks,got normal circlip pliers just thought there might be some with flat ends to get a better grip on the ends.