Topic: Derale Tornado Fan (Read 2949 times)

willo · « **on:** May 17, 2011, 09:39:52 PM »

Does anyone know if its possible to get a brush and bearing set for a derale tornado fan as mine are getting a bit fubar

Thanks

Will

Dave The Sparky · « **Reply #1 on:** May 17, 2011, 09:59:55 PM »

If you cant get one then i suggest you see your local bearing supplier for the bearings and your local motor rewinder for the brushes

willo · « **Reply #2 on:** May 17, 2011, 10:09:36 PM »

yes, thanks dave, i was gonna see if i could source some new bearings as they are the more shagged bit

Dave The Sparky · « **Reply #3 on:** May 17, 2011, 10:16:37 PM »

you may get a bit more life out of the brushes by swapping them over as one should be far more worn than the other

willo · « **Reply #4 on:** May 17, 2011, 10:20:19 PM »

you may get a bit more life out of the brushes by swapping them over as one should be far more worn than the other

the bearing or brushes?

Bubba · « **Reply #5 on:** May 17, 2011, 10:29:32 PM »

brushes

MOCAJ · « **Reply #6 on:** May 18, 2011, 07:23:16 AM »

measure the bearings then visit here to get the size

http://simplybearings.co.uk/shop/index.php?gclid=CKXEuKju8KgCFUYPfAodAEJ3Cw

buy off them or go to your local bearing shop, and go for a decent make, some of the cheapies are just that