Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Is my starter motor screwed?  (Read 1293 times)

0 Members and 1 Guest are viewing this topic.

MudSurfer

  • Guest
Is my starter motor screwed?
« on: June 15, 2011, 02:26:37 PM »

Well, after the time (and considerable amount of money) spent on getting the Jeep back up and working, part of the process involved a lot of cranking of the engine, and recently when starting, it's let out a squeal similar to one you'd hear if you turn the key when the engine is already running (but in this case, the engine wasn't).  I wonder if this is because I've toasted the started while trying to sort out the injector issues??

Any ideas?
Logged

Panic mechanic!

  • Guest
Re: Is my starter motor screwed?
« Reply #1 on: June 15, 2011, 03:15:31 PM »

possibly or you may have damaged the starter ring
Logged

Dutch

  • The Curator
  • Club Member
  • Forum Member
  • *
  • Guru: 12
  • Offline Offline
  • Posts: 5798
Re: Is my starter motor screwed?
« Reply #2 on: June 15, 2011, 03:29:30 PM »

Mudsurfer dude,

Doesn't sound good mate.  Told you to leave it alone.

Hope its just the starter motor that's playing up.  :icon_rolleyes:
Logged

Jeepless :-( 2006 Chrysler Crossfire Roadster 3.2 V6 - 1993 Yamaha FJ1200

Bishops Finger

  • Guest
Re: Is my starter motor screwed?
« Reply #3 on: June 15, 2011, 03:45:49 PM »

Might be waterpump on it's way
Logged

eastryjeep

  • Guest
Re: Is my starter motor screwed?
« Reply #4 on: June 15, 2011, 05:29:57 PM »

Not sure about modern Jeeps but possibly just a knackered solenoid not engaging pinion into ring gear before the starter spins up?
Put the vehicle in gear and roll it forward a bit, back into neutral, then try again.
If it starts fine I'd suspect a worn ring rear, or if you get the same horrid grinding ringing screech of the famous but rarely seen Wallet Owl, then I'd go with your first guess.
Logged

jay140285

  • Guest
Re: Is my starter motor screwed?
« Reply #5 on: June 16, 2011, 10:52:45 AM »

Not sure about modern Jeeps but possibly just a knackered solenoid not engaging pinion into ring gear before the starter spins up?


I would possibly go with this, My MX5 used to do it, several re tries of the key and it would fire up.
Logged
Pages: [1]   Go Up
 

Powered by EzPortal