started the diff rebuild today and thought I would try to keep a record of the rebuild.
first job is to jack up the rear end and securely support it with jack stands
[attachment=1]
remove the diff cover and drain the oil.
remove the wheels, break callipers and disc.
[attachment=2]
next remove the lock screw that holds the pinion gear mate shaft in place.
now push the drive shaft inward this will release the 'C' so it can be removed with your fingers, the shaft can now be gently pulled out enough to clear the diff assembly.
undo the 4 carrier bolts and remove the caps, be careful to not let the bearing outers and shims fall.
[attachment=3]
thats as far as i got today, more to follow (after i get some advice
)
