Topic: Axle lockers - who has them? (Read 4474 times)

300bhp/ton · « **on:** October 21, 2011, 06:57:55 PM »

For a XJ with a Dana 35.

What are you running and where did you get it from?

bigjeepzj · « **Reply #1 on:** October 21, 2011, 07:07:21 PM »

zj arb 30 spline
got FTE to supply and fit

Bubba · « **Reply #2 on:** October 21, 2011, 07:24:46 PM »

ooo theres posh powertax no slip for me

wildwood · « **Reply #3 on:** October 21, 2011, 07:27:45 PM »

On the YJ....... Dana 44 rear had a lockrite for 8 years no probs
on the front Dana 30 lockrite for 8 years then ARB (makes tight turns a possibility)
lockrites from the US and ARB second hand off the shelf at FTE and fitted by Steve......

'1 ton' to have Detroit at rear 14 bolt (got it)
Lockrite in front Dana 60......... tight turns not a prob as hydro steered now

Mike Pavelin · « **Reply #4 on:** October 21, 2011, 07:34:07 PM »

ARB front and rear

Bubba · « **Reply #5 on:** October 21, 2011, 07:35:52 PM »

ooo i think they v overrated but that just the opinion of my retarded self

Bishops Finger · « **Reply #6 on:** October 21, 2011, 11:12:23 PM »

If ya gonna get stuck....err ya gonna get stuck..

Lornaben · « **Reply #7 on:** October 21, 2011, 11:19:59 PM »

Lockers = longer winching time

The Smiths · « **Reply #8 on:** October 21, 2011, 11:21:40 PM »

Quote from: Mike Pavelin on October 21, 2011, 07:34:07 PM

ARB front and rear

I replaced axles with detroits front and rear, much prefer the ARBs as you can leave them off, and switch them on when needed

Green Jeep · « **Reply #9 on:** October 24, 2011, 12:29:42 PM »

Aussie lockers front and rear. Excellent value, £150 each end... happy days

wildwood · « **Reply #10 on:** October 24, 2011, 12:56:30 PM »

As said lockers are good................... but you'll get stuck further in and deeper .................and further away from help

Lornaben · « **Reply #11 on:** October 24, 2011, 01:04:03 PM »

Quote from: wildwood on October 24, 2011, 12:56:30 PM

As said lockers are good................... but you'll get stuck further in and deeper .................and further away from help

See, I was right

Quote from: Lornaben on October 21, 2011, 11:19:59 PM

Lockers = longer winching time

UKJeeper · « **Reply #12 on:** October 24, 2011, 01:56:02 PM »

Quote from: Mike Pavelin on October 21, 2011, 07:34:07 PM

ARB front and rear

willo · « **Reply #13 on:** October 24, 2011, 02:05:37 PM »

ARB fore n aft :-)

Green Jeep · « **Reply #14 on:** October 25, 2011, 05:15:12 PM »

Quote from: wildwood on October 24, 2011, 12:56:30 PM

As said lockers are good................... but you'll get stuck further in and deeper .................and further away from help

Or you'll get through/up/back out without help/big revs/numerous attempts...

Plus you can tackle stuff and a slower pace and revs...less damage to truck/contents/terrain...

Depends on driving style, if you like nailing it then lockers could cause knock on problems as of course more stress on UJ's etc...

Lockers

John McBride · « **Reply #15 on:** October 25, 2011, 06:22:39 PM »

ARB's front and rear, still going strong after 15 years.

JamesH · « **Reply #16 on:** October 25, 2011, 07:43:19 PM »

Detroit rear, Truetrac front. Would go proper full locker in the front, probably ARB if re-doing it.

MOCAJ · « **Reply #17 on:** October 25, 2011, 08:23:50 PM »

i got some lockers in the front and rear of my red TJ

and some at work for my overalls

Bishops Finger · « **Reply #18 on:** October 25, 2011, 11:30:57 PM »

Bulldog67 · « **Reply #19 on:** October 25, 2011, 11:40:23 PM »

I had no idea all you lot are so minted wiv ya ARB's

Author Topic: Axle lockers - who has them? (Read 4474 times)

300bhp/ton

Mike Pavelin

Bishops Finger

Green Jeep

UKJeeper

Green Jeep

John McBride

Bishops Finger