Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: American License plate bolts ??  (Read 1548 times)

0 Members and 1 Guest are viewing this topic.

Dtimot8

  • Guest
American License plate bolts ??
« on: December 30, 2011, 03:27:48 PM »
Does any one know the size of the bolts/machines screws that fits the US license plate holes?
M5's to small M6's to big
if i'm being dumb tell me so but suggest a solution
Thanks
Logged

classicjeep

  • Guest
Re: American License plate bolts ??
« Reply #1 on: December 30, 2011, 03:29:43 PM »
Try 1/4  UNF or UNC ?
Logged

Jonny Jeep

  • Regular Member
  • Forum Member
  • *
  • Guru: 11
  • Offline Offline
  • Posts: 1372
  • Vehicle: TJ 4.0 Sport
  • Year: 1997
Re: American License plate bolts ??
« Reply #2 on: January 03, 2012, 09:08:29 PM »
If M6 is too big 1/4" will be far too big at another 0.35 mm wider diameter.

Try and find some 12-24 (UNC) or 12-28 (UNF) threaded bolts. It's the next size down from 1/4" - just checked it's 5.486mm.
Logged

Dtimot8

  • Guest
Re: American License plate bolts ??
« Reply #3 on: January 04, 2012, 08:05:09 PM »
Thanks chaps
Logged

MOCAJ

  • Club Member
  • Forum Member
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 6366
Re: American License plate bolts ??
« Reply #4 on: January 04, 2012, 09:26:17 PM »
alternative is to drill hole out to 6mm, then put a nut and bolt straight through  :icon_winkle:
Logged
short term jeep owner since 2005, every truck is a never ending project. Birtys, the best club in Jeepland

MOCAJ

  • Club Member
  • Forum Member
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 6366
Re: American License plate bolts ??
« Reply #5 on: January 04, 2012, 09:27:22 PM »
thats what i have done with my LED lights in the bolts  :greggmo:
Logged
short term jeep owner since 2005, every truck is a never ending project. Birtys, the best club in Jeepland

eastryjeep

  • Guest
Re: American License plate bolts ??
« Reply #6 on: January 09, 2012, 12:35:10 PM »
Part way between Dia. 5mm and Dia. 6mm in Imperial is 7/32 - any thread you like as long as the nut and bolt are the same!
Logged

Jonny Jeep

  • Regular Member
  • Forum Member
  • *
  • Guru: 11
  • Offline Offline
  • Posts: 1372
  • Vehicle: TJ 4.0 Sport
  • Year: 1997
Re: American License plate bolts ??
« Reply #7 on: January 12, 2012, 07:47:40 PM »
You won't find a 7/32" thread though. Below 1/4" in diameter UN threads are numbered sizes.
Logged

eastryjeep

  • Guest
Re: American License plate bolts ??
« Reply #8 on: January 13, 2012, 03:44:00 PM »
Don't you just hate it when someone proves they are smarter than you?
7/32" is no longer a recognised size - buggrit!

Try a No. 12 UNF, major dia 0.216" per this site http://www.britishfasteners.com/threads/unf.html or Dia 5.48mm for the youngsters!
Logged

Panic mechanic!

  • Guest
Re: American License plate bolts ??
« Reply #9 on: January 13, 2012, 04:57:51 PM »
 take it the plastic type are too big?
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal