Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: engine light  (Read 1227 times)

0 Members and 1 Guest are viewing this topic.

david.varady

  • Guest
engine light
« on: January 15, 2012, 08:16:38 PM »
When i drive my jeep down the interstate and this only happens in forth gear, when the rpm's go over 2000 the check engine light comes on. Iv'e looked through wiring diagrams and tried solving the problem myself, i'm scratching my head on this one any help would be nice.
Logged

Panic mechanic!

  • Guest
Re: engine light
« Reply #1 on: January 15, 2012, 08:32:11 PM »
a whole host of things can get the engine check light on,you need to get a obd2 scanner and get any codes to see if there are any problems or used the ignition switch trick to get them.
Logged

Jonny Jeep

  • Regular Member
  • Forum Member
  • *
  • Guru: 11
  • Offline Offline
  • Posts: 1372
  • Vehicle: TJ 4.0 Sport
  • Year: 1997
Re: engine light
« Reply #2 on: January 16, 2012, 07:10:32 PM »
You can get OBDI two digit codes by turning the ignition on-off-on-off-on within five seconds nd leaving it on the third time.
The "check engine" light will flash. Count the flashes Each code is a two digit code, so a (for example) 23 would be FLASH FLASH (pause) FLASH FLASH FLASH (loong pause)
It will never flash more than 9 times, watch for pauses!
55 is end of codes - it's normal.

See what comes up and check the codes out at http://www.allpar.com/fix/80s-codes.html
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal