Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: running fault any ideas  (Read 1286 times)

0 Members and 1 Guest are viewing this topic.

robsrotti

  • Guest
running fault any ideas
« on: May 31, 2012, 09:45:52 PM »
Well the xj 4.0L was running fine until it just cut out, restarted and cut out again after about 6 secs and now will not start. Yes there is petrol in it and turns over fine but will not fire. It is a 2000 model with no dizzy, no fault codes show on the dash. Any ideas would be great thanks Rob.
Logged

bigjeepzj

  • Club Member
  • Guru
  • *
  • Guru: 22
  • Offline Offline
  • Posts: 3438
  • lift it, brake it, Fix it brake it, fix it again
Re: running fault any ideas
« Reply #1 on: May 31, 2012, 10:34:43 PM »
sounds like an immobiliser fault
Logged

The Smiths

  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 1084
Re: running fault any ideas
« Reply #2 on: May 31, 2012, 10:46:03 PM »
CPS??
Logged
If you always do what you have always done You will always get what you have always got
Please give to our Mac4x4 fund: http://www.justgiving.com/The-Smiths-2015

JamesH

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4998
  • Vehicle: JK
  • Year: 2010
Re: running fault any ideas
« Reply #3 on: May 31, 2012, 10:50:43 PM »
crank position sensor or cam position sensor (in distributor on models that have one but later ones still have a sensor I believe)

Best to get scanned for fault codes rather than replace bits by bits
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal