Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: what to do about my 3.07 ratio....  (Read 1059 times)

0 Members and 1 Guest are viewing this topic.

paulesc

  • Guest
what to do about my 3.07 ratio....
« on: April 24, 2012, 05:45:56 PM »
Ok, so I've got a 98 tj with 31" tyres , Dana 30 / Dana 44 with std tracloc/lsd.
its not the end of the world but this is what I'm thinking.
There must be 3.73 axles or gears around for not a lot?
Would it be easier / cheeper to find a set of axles and swap them, then sell mine on rather
than a regear? Or just not worry about using 5th to much
Logged

MOCAJ

  • Club Member
  • Forum Member
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 6366
Re: what to do about my 3.07 ratio....
« Reply #1 on: April 24, 2012, 05:54:41 PM »
will cost you to regear, new ring and pinions and setting up and then whilst it is out shall i fit lockers, rebuild that LSD ?

i would leave it as is on 31's and do it if you go up to 33's in the future  :icon_winkle:

Logged
short term jeep owner since 2005, every truck is a never ending project. Birtys, the best club in Jeepland

isle of man

  • بعض العضو التناسلي النسوي...
  • Club Member
  • Forum Member
  • *
  • Guru: 6
  • Offline Offline
  • Posts: 11537
  • Vehicle: G-Class AKA “The G spot”
  • Take the road less travelled...
    • http://www.4x4.im
Re: what to do about my 3.07 ratio....
« Reply #2 on: April 24, 2012, 06:20:58 PM »
Quote from: my other cars a jeep on April 24, 2012, 05:54:41 PM
will cost you to regear, new ring and pinions and setting up and then whilst it is out shall i fit lockers, rebuild that LSD ?

i would leave it as is on 31's and do it if you go up to 33's in the future  :icon_winkle:




I concur..
Logged
"Not all those who wander are lost"

paulesc

  • Guest
Re: what to do about my 3.07 ratio....
« Reply #3 on: April 25, 2012, 09:14:03 AM »
Ta , I stick with the 3.07 :0)
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal