Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Getting Ready for the lift install!  (Read 1315 times)

0 Members and 1 Guest are viewing this topic.

Roberts588

  • Guest
Getting Ready for the lift install!
« on: March 23, 2013, 09:02:22 PM »

Now I've got the rust all sorted its on to the lift and all the other stuff.

Been stock piling a load of stuff over the past couple of weeks and the final piece of the puzzle came today with great surprise, bought a adjustable Track bar kit RHD from Iron Rock off road on the 19th and arrived today plus no import tax! Boom lol

Total parts include:

New leaf springs 5"
RC quick disconnects
RC adjustable lower control arms
RC adjustable upper controls arms
RC 5" springs
RC front and rear shocks
RC shackle relocation kit
RC pin Elimators front and rear
RC steering stabiliser
Alloy axle seals
Stainless steel braid brake lines
IRO adjustable track bar kit
Rock rusher Diff guards Dana30 and Dana35
IRO over the knuckle steering kit
Front Winch bumper from Mike
12000lb super winch
33x12.50x15 Copper STT's
Bushwhacker Wheel arch extensions
Safari snorkel




In a few weeks I'm going to get a Slip yoke kit with upgrade drive shaft.

Going to tackle this lot on Friday.







Sent from my iPad using Tapatalk HD
Logged

Bulldog67

  • Arthur Daley: Graduated
  • Guru
  • *
  • Guru: -936
  • Offline Offline
  • Posts: 25395
  • Vehicle: Man Sized Old Iron
  • Anti Colour Truck Mafia - I'm The Fuckin Daddy
Re: Getting Ready for the lift install!
« Reply #1 on: March 23, 2013, 11:03:02 PM »

sorry dood but we need the finished ......

 :ttiwwp:


roll on next weekend :icon_super:
Logged
Bulldog's 22+ trucks: http://www.birtydastards.com/frm/index.php?topic=20288.0 :025:                                   :headbanger: 401 Dog * 401 Molotov :headbanger:  
Civilise the mind but make savage the body  :027:           Im only responsible for my karma :059:

Dodster

  • Guest
Re: Getting Ready for the lift install!
« Reply #2 on: March 24, 2013, 12:17:56 PM »

Cool... :greggmo:
I would be interested to see how the over knuckle steering set up goes when you get round to it.
cheers.
Logged

Roberts588

  • Guest
Re: Getting Ready for the lift install!
« Reply #3 on: April 27, 2013, 09:02:53 PM »

Right Then Chaps.

I got the tyres on today and had the wheel alignment done. £40 kwik fit and it was all to cock lol

so heres the half finished product...







Cheers
Logged

jay140285

  • Guest
Re: Getting Ready for the lift install!
« Reply #4 on: April 28, 2013, 01:19:28 AM »

Fook me that's a tight squeeze on that tralier.

Looks good though.
Logged
Pages: [1]   Go Up
 

Powered by EzPortal