Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: The Set Up Vehicle  (Read 1330 times)

0 Members and 1 Guest are viewing this topic.

Nobby

  • Guest
The Set Up Vehicle
« on: April 03, 2014, 08:00:17 PM »

so this is the plan

got a few things to sort out a few moarns and groans 1 of which i think is the LSD plates so got a cure for that on its way (hopefully) then time to look at the petrol leak i think when they done the gas conversion and put a smaller tank on it wasnt sealed properly as when its full it leaks a bit from by the filler neck some where any suggestions be welcome then a small 2 inch lift to make way for some nice Maxxis bighorns the winch is already on order and should be here next week so can start butchering the front end ooppsss i mean teasing it in gently  :017: :017:
the HID kit arrived today  :icon_winkle: as when i brought it home i thought i was on sidelights but infact it was dip so they are destined for the scrap bin, and on the subject of lights some nice new shiney leds front back and sides will help make things easier to hit me thinks plus some nice amber flashing things to make it look like a council work van .......other stuff on my list of to do's

CB
Snorkel unsure in this
exhaust needs a serious seeing to as it sounds like a hearse its just tooooo quiet for a 4.0ltr
a good service if shes a good girl
and not forgetting the event and sponsor stickers to show my thanks to those who have helped

plus the gas needs some fettling as its good but think it could be better how many miles to a 70ltr tank do you guys get please for you that are on lpg

im sure i will find more as im going along but i think i got enough to be getting along with

butchering pics to follow i mean modding pics :97: :97:

Nobby
Logged

jay140285

  • Guest
Re: The Set Up Vehicle
« Reply #1 on: April 04, 2014, 10:22:10 AM »

Quick one, re fuel leak.

The rubber neck goes porus, ours did on the WJ.

2 options, Change the rubber filler neck or dont brim the tank.

I chose not to brim the tank. Just filled up to the first click of the pump.
Logged

Nobby

  • Guest
Re: The Set Up Vehicle
« Reply #2 on: April 05, 2014, 08:22:06 AM »

thanks for the advice on the filler neck just done a ebay search and nothing on there so does any one know what the sizes are for one of these please so i can try and get a bit of pipe to get it changed as the smell is really bad and tbh i enjoy driving this and cant get my arse out of the seat

cheers

Nobby
Logged
Pages: [1]   Go Up
 

Powered by EzPortal