Topic: How can I get rid of a bodged immobilizer on my CJ7 (Read 2137 times)

Dutch · « **on:** May 24, 2014, 04:46:17 PM »

Today was tinker day to get it ready for mot.

After standing for a bit the bl**dy immobilizer decided not to play ball

so I can't even start the thing.

The box is ticking but no go. Wires going all over the place and nowhere and all different colours, cut off ones, thick wires and thin ones. The fob light comes on when I press it so the battery must still be good.

Wish I could just rip the thing out

Not a happy bunny

bigjeepzj · « **Reply #1 on:** May 24, 2014, 05:42:36 PM »

You just have to trace them all out and restore the wiring to factory
there mostly connected to the starter and coil
the thick ones are possibly the power or go to the starter
sorry can't be more help

bgbazz · « **Reply #2 on:** May 24, 2014, 06:01:24 PM »

This is the longest shot of all, but one which has worked for me....unhook vehicle battery and place on charger for 2 or 3 hours...reconnect battery and try again.

Dave69 · « **Reply #3 on:** May 24, 2014, 08:52:44 PM »

should be fairly straight forward working out where wires have been spliced since the immobilisers wiring most likely be different to the standard cj wires. downside is how its wired into the ecu

Some wiring diagrams, mainly for a 79, but there is one for an '86 that might help

http://s3.amazonaws.com/2cp-images/question_images/83401/large.JPG

http://s3.amazonaws.com/2cp-images/question_images/83411/large.JPG

http://www.jeep-cj.com/forums/f7/front-turn-signal-issues-8183/

http://webspace.webring.com/people/dg/geer_hed/images/86_cj_elec.gif

Author Topic: How can I get rid of a bodged immobilizer on my CJ7 (Read 2137 times)

Dutch

How can I get rid of a bodged immobilizer on my CJ7

bigjeepzj

Re: How can I get rid of a bodged immobilizer on my CJ7

bgbazz

Re: How can I get rid of a bodged immobilizer on my CJ7

Dave69

Re: How can I get rid of a bodged immobilizer on my CJ7