Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: lpg install  (Read 2060 times)

0 Members and 1 Guest are viewing this topic.

just-boot-it

  • Guest
lpg install
« on: June 14, 2014, 10:03:08 PM »

I'll be offering up my lpg kit soon before final fitting and as I need to move the fuel tank to drill the holes for the lpg tank how and how much manoeuvring of the fuel tank van you get away with?
Logged

wildwood

  • The 1 Tonne Kid
  • Marshal
  • Forum Member
  • *
  • Guru: 14
  • Offline Offline
  • Posts: 5921
Re: lpg install
« Reply #1 on: June 14, 2014, 11:46:27 PM »

If you mean .....where can I move it to or where to put it???

The answer Is...any where you want... as long as the filler is outside the passenger area.

Moved mine away from underneath.....( YJ) and have 3 gall alloy tank in rear instead......

If that is what you are asking?
Logged

just-boot-it

  • Guest
Re: lpg install
« Reply #2 on: June 15, 2014, 07:09:59 PM »

No. I ment how much movement can you get from the fuel tank without disconnecting the sender unit as I want to drill the holes and re attach the fuel tank.
Logged

wildwood

  • The 1 Tonne Kid
  • Marshal
  • Forum Member
  • *
  • Guru: 14
  • Offline Offline
  • Posts: 5921
Re: lpg install
« Reply #3 on: June 15, 2014, 07:21:52 PM »

Arhhhhh! See what you mean.

You can unbolt tank and drop about six inches and move around.......
But you can disconnect elex under there and pull pipes.
Just remove fuse thing from under hood and start engine till it stops .....then you're safe. Otherwise you'll get 30 psi of unleaded in your face.......
Logged

just-boot-it

  • Guest
Re: lpg install
« Reply #4 on: June 15, 2014, 07:32:09 PM »

Cheers, I think the first option is ok. Don't fancy a petrol bath.
Logged
Pages: [1]   Go Up
 

Powered by EzPortal