Topic: 02 GC reverse sensors (Read 1972 times)

allante666 · « **on:** April 10, 2013, 12:25:59 PM »

Hi.
I have an 02 GC Overland with the genuine Jeep reverse sensor system. Its never worked while ive had it and always been totally dead. I have the installation manual and according to that there should be two 12v feeds to the control unit when its in reverse with the ign on. the feeds are both there and correct. all earths seem to be ok, reversing lights are working. theres a strange bosch thing that looks liek a fuse but in fact is a 240 ohm resistanc. this also checks out ok and has feedon both sides of it. Anyone had anything similar? any ideas? theres no led's, no beeps, nothing.

bluevanman · « **Reply #1 on:** April 10, 2013, 09:09:59 PM »

i seem to recall dodgy sensors either buzz or dont buzz?? that'll stop it working

allante666 · « **Reply #2 on:** March 05, 2015, 11:31:09 AM »

Well two years later and ive fixed it lol. (I havent been trying all that time) Dont know where I got the manual from but it doesnt need two feeds, it just needs one feed from the reverse lights, the other one is an earth. Swapped it over and all works well now

Author Topic: 02 GC reverse sensors (Read 1972 times)

allante666

02 GC reverse sensors

bluevanman

Re: 02 GC reverse sensors

allante666

Re: 02 GC reverse sensors