Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Front end knocking  (Read 2763 times)

0 Members and 1 Guest are viewing this topic.

Sooty Si

  • Guest
Front end knocking
« on: January 04, 2016, 07:58:22 PM »
Alright, so, further to my post about wheel bearings, I've replaced the front nearside CV joint - what I thought was the source of the knocking sound from that area when turning and driving (only noticeable at very low speed for example when reversing and turning out of my driveway). Didn't make any difference. Someone has suggested front nearside droplink, but my experience of worn drop links is more of a lighter tapping noise when driving. What else could it be? Any suggestions?
Logged

scrw

  • Club Member
  • Guru
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 749
  • Vehicle: jeep
  • BD, Fred Kite reincarnated
Re: Front end knocking
« Reply #1 on: January 04, 2016, 09:22:28 PM »
Front prop, take it off & see if it still does it. Suppose it could also be the gearbox/transfer case mount, but I would expect 1 clunk rather than multiple
Logged

Sooty Si

  • Guest
Re: Front end knocking
« Reply #2 on: January 05, 2016, 12:15:00 PM »
Yeah, it's more of a regular, light, knocking sound relative to wheel speed, rather than just an odd knock every now and then. Which is why I went straight to cv joint based on past experience with cars (not 4x4's).
Logged

Mike Pavelin

  • Guest
Re: Front end knocking
« Reply #3 on: January 05, 2016, 06:58:22 PM »
Check the wheel nuts.
Logged

Sooty Si

  • Guest
Re: Front end knocking
« Reply #4 on: January 05, 2016, 08:16:07 PM »
All good.
Logged

Panic mechanic!

  • Guest
Re: Front end knocking
« Reply #5 on: January 05, 2016, 08:31:03 PM »
I had a wj and it had a knocking noise that appeared to come from the front n/s , when I eventually found the problem it was n/s rear shock absorber  rubber bush had worn... :banghead:
Logged

jay140285

  • Guest
Re: Front end knocking
« Reply #6 on: January 06, 2016, 01:12:50 AM »
Agree with Panic, I had a knock similar to what your describing and it was worn shock mounts.

Turned out to be a good excuse for a 3inch lift all round!


www.facebook.com/jrservicingandtransport

www.jrservicingandtransport.co.uk
Logged

Bulldog67

  • Arthur Daley: Graduated
  • Guru
  • *
  • Guru: -936
  • Offline Offline
  • Posts: 25395
  • Vehicle: Man Sized Old Iron
  • Anti Colour Truck Mafia - I'm The Fuckin Daddy
Re: Front end knocking
« Reply #7 on: January 06, 2016, 07:16:14 AM »
Wheel nuts
Logged
Bulldog's 22+ trucks: http://www.birtydastards.com/frm/index.php?topic=20288.0 :025:                                   :headbanger: 401 Dog * 401 Molotov :headbanger:  
Civilise the mind but make savage the body  :027:           Im only responsible for my karma :059:

Sooty Si

  • Guest
Re: Front end knocking
« Reply #8 on: January 06, 2016, 12:22:43 PM »
As stated above, wheel nuts are all good.
Logged

Bulldog67

  • Arthur Daley: Graduated
  • Guru
  • *
  • Guru: -936
  • Offline Offline
  • Posts: 25395
  • Vehicle: Man Sized Old Iron
  • Anti Colour Truck Mafia - I'm The Fuckin Daddy
Re: Front end knocking
« Reply #9 on: January 06, 2016, 05:25:15 PM »
scrolling to quick on my phone - sorry dood
Logged
Bulldog's 22+ trucks: http://www.birtydastards.com/frm/index.php?topic=20288.0 :025:                                   :headbanger: 401 Dog * 401 Molotov :headbanger:  
Civilise the mind but make savage the body  :027:           Im only responsible for my karma :059:

Sooty Si

  • Guest
Re: Front end knocking
« Reply #10 on: January 06, 2016, 06:14:40 PM »
Haha, no worries. When I get back home (away on a ourse at the mo) on Friday, I'll double check the nuts and shock mounts and drop links just to be sure.
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal