Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: water pump mounting hardware - i6 4.2l  (Read 3795 times)

0 Members and 1 Guest are viewing this topic.

BIGDRY

  • Guest
water pump mounting hardware - i6 4.2l
« on: February 09, 2016, 09:30:29 AM »
Hello all, attacking my cj from all angles at the moment...
I need new hardware for the new water pump, everything i took off was rusted,snapped and mangled...

I've been quoted £20 for the studs! anyone know what thread the standard studs are and correct size, lengths etc? im assuming something imperial? (which is i why i dont have a clue!ha ha)

thx all
Logged

Jonny Jeep

  • Regular Member
  • Guru
  • *
  • Guru: 11
  • Offline Offline
  • Posts: 1372
  • Vehicle: TJ 4.0 Sport
  • Year: 1997
Re: water pump mounting hardware - i6 4.2l
« Reply #1 on: February 09, 2016, 11:40:43 AM »
It doesn't specify the threads in the 86 parts list. In the TJ parts list the threads are all .312 which is 5/16". Mounting bolts to the engine on the TJ are 5/16-18 (UNC) the studs for fitting the fan on the TJ are 5/16 18 - 5/16 24 and 1.25 inch long. That might be a good size to try. Not sure if we'd have anything that size in work or not.
Logged

BIGDRY

  • Guest
Re: water pump mounting hardware - i6 4.2l
« Reply #2 on: February 09, 2016, 02:14:28 PM »
Thx Jonny, this forum is most helpful, refreshing compared to others! cheers again.
Logged

Jonny Jeep

  • Regular Member
  • Guru
  • *
  • Guru: 11
  • Offline Offline
  • Posts: 1372
  • Vehicle: TJ 4.0 Sport
  • Year: 1997
Re: water pump mounting hardware - i6 4.2l
« Reply #3 on: February 09, 2016, 10:34:47 PM »
Couldn't find the box with studs in today which is bloody typical. Nothing ever gets put back when people are finished. I'll try again tomorrow.
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
Re: water pump mounting hardware - i6 4.2l
« Reply #4 on: February 10, 2016, 11:53:31 AM »
are yours lost ?

i probably have them in the many bolts tubs at in my shed left over from the many cjs i had   but i have to say you should be able to find them from any good engineering hardware suppliers
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

Jonny Jeep

  • Regular Member
  • Guru
  • *
  • Guru: 11
  • Offline Offline
  • Posts: 1372
  • Vehicle: TJ 4.0 Sport
  • Year: 1997
Re: water pump mounting hardware - i6 4.2l
« Reply #5 on: February 10, 2016, 08:48:41 PM »
Found the box. Only two of them in the size I mentioned above. PM your address and I'll stick them in an envelope so you can try them for size.

Sent from my D5803 using Tapatalk

Logged

bisleywrangler

  • Admin
  • Guru
  • **
  • Guru: 1
  • Offline Offline
  • Posts: 445
  • Vehicle: Wrangler
  • Year: 1997
Re: water pump mounting hardware - i6 4.2l
« Reply #6 on: February 10, 2016, 11:13:39 PM »
Not much help now I know but I found it really useful to buy a cheap imperial tap and die set. Rubbish for tapping from fresh but great for finding the thread size and cleaning out rusty/dirty threads.


Sent from my iPhone using Tapatalk
Logged

Jonny Jeep

  • Regular Member
  • Guru
  • *
  • Guru: 11
  • Offline Offline
  • Posts: 1372
  • Vehicle: TJ 4.0 Sport
  • Year: 1997
Re: water pump mounting hardware - i6 4.2l
« Reply #7 on: February 13, 2016, 11:46:40 AM »
Posted the studs with a couple each of 5/16 unc/unf bolts. Stuck a normal and nyloc nut on each end of both the studs too.

Sent from my D5803 using Tapatalk

Logged

BIGDRY

  • Guest
Re: water pump mounting hardware - i6 4.2l
« Reply #8 on: February 13, 2016, 11:16:19 PM »
You're a gent.thx
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal