Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Tj clutch  (Read 4017 times)

0 Members and 1 Guest are viewing this topic.

donk498

  • Guest
Tj clutch
« on: July 11, 2016, 11:49:48 AM »
Best place to source a clutch kit for a 99 tj 4ltr? Also a Dana 30 rebuild kit. Lighthouse?

Expensive 2hours at Walter arena  :banghead:
Logged

Green Jeep

  • Guest
Re: Tj clutch
« Reply #1 on: July 11, 2016, 02:03:23 PM »
eBay? Of course make sure it is a decent make.

ADL one:

http://www.ebay.co.uk/itm/Jeep-Wrangler-YJ-SJ-TJ-1986-2008-Cherokee-XJ-1984-2001-Blueprint-Clutch-Kit-/301839915714?fits=Model%3AWrangler%7CCars+Type%3A4.0&hash=item46470f9ac2:g:uogAAOSwHaBWilD7

Has the clutch failed or worn out? You can get the plate relined.

Also worth changing rear main seal whilst in there.

What has failed on the front axle? I got away with replacing one of the small cogs and all was fine.
Logged

Ezz

  • Club Member
  • Guru
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 1076
  • Vehicle: TJ
  • Year: 1997
Re: Tj clutch
« Reply #2 on: July 11, 2016, 02:48:11 PM »
Time to covert it to auto  :strum:
Logged
2009 JK Rubicon now sold
1997 TJ wrangler 4.0, jk rubicon 5.38 geared  axles, 38.5 mud treps,  101" wheelbase

wildwood

  • The 1 Tonne Kid
  • Marshal
  • Guru
  • *
  • Guru: 14
  • Offline Offline
  • Posts: 5921
Re: Tj clutch
« Reply #3 on: July 11, 2016, 04:24:46 PM »
Go  1 Tons..... :icon_twisted:

But I would say that :icon_biggrin:
Logged

Delk

  • Guest
Re: Tj clutch
« Reply #4 on: July 11, 2016, 05:24:14 PM »
My clutch gets a good amount of abuse. The original started slipping when towing someone home in the mountains. The jeep had around 50k on it. I changed it for a centerforce. Some people complain they vibrate but mine has worked fine. The jeep now has around 120k on it of general abuse and clutch has taken a beating but hasn't given up the ghost yet.
Logged

donk498

  • Guest
Re: Tj clutch
« Reply #5 on: July 11, 2016, 09:05:12 PM »
Release bearing shit itself, but while its out I'll change the lot.
Front axle pinion bearings are shot. Hoping the ring and pinion and the arb are OK.

Oh and need to get the rear prop rebuilt and change the d44 pinion yoke  :die:
Logged

cuffm

  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 207
  • Vehicle: XJ
  • Year: 1998
Re: Tj clutch
« Reply #6 on: July 11, 2016, 09:29:33 PM »
Donk,

I've got a Dana 30 4.56 R&P in the garage. 

Yours for a donation to dog charity.

Its been stuck in the garage for months.

Cuffy
Logged

donk498

  • Guest
Re: Tj clutch
« Reply #7 on: July 11, 2016, 10:19:03 PM »
Cheer cuffy, I'll let you know shortly if its needed.
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal